Skip to content

C
CG-Seminar
Commit 47c1afd9 by Kai Westerkamp
Options

Folien base

parent bef5c713
Showing with 6006 additions and 0 deletions
Folien/Install-De.txt 0 → 100644
Installation
Klaus Braune
klaus.braune@kit.edu
Karlsruher Institut fuer Technologie (KIT)
Steinbuch Centre for Computing
Version 2.0, 15. Mai 2012
KIT-Pakete
==========
KIT-Pakete werden als zip-Archive verteilt, die eine Installationsanleitung,
die Benutzerdokumentation, ein zip-Archiv zur Installation der allen
KIT-Vorlagen gemeinsamen Dateien und fuer jeden unterstuetzten Dokumenttyp
zwei zip-Archive - das eine mit den Installationsdateien, das andere mit
Beispielen - enthalten. Die verteilten zip-Archive - bisher
'KIT-Vorlagen-Briefe.zip', 'KIT-Vorlagen-Folien.zip' und
'KIT-Vorlagen-Poster.zip' - sollten in einem temporaeren Verzeichnis entpackt
werden, das nach der Installation komplett wieder geloescht werden kann.
Im Folgenden wird das temporaere Verzeichnis, in dem verteilte zip-Archive
entpackt wurden, mit <temp> bezeichnet.
Installationsverzeichnisse
==========================
Die Installationsverzeichnisse unterscheiden sich bei den verschiedenen
TeX-Distributionen. Hier werden die Installationsverzeichnisse fuer MiKTeX
Version 2.9 und Linux behandelt.
Beide Distributionen unterscheiden zwischen Installationsverzeichnissen
der Distribution und lokalen Installationsverzeichnissen. Der wichtigste
Unterschied zwischen den beiden Arten ist, dass die Installationsverzeichnisse
der Distribution bei einer Neuinstallation - gegebenenfalls auch einem
Upgrade - ersetzt werden, waehrend die lokalen Installationsverzeichnisse
nicht angetastet werden.
Daher sollten Pakete, die in der Distribution angeboten werden, im
Installationsverzeichnis der Distribution installiert werden (auf dem
normalen Weg zur Installation von Zusatzpaketen). Pakete wie die KIT-Pakete
sollten hingegen in lokalen Installationsverzeichnissen installiert werden,
die von Aenderungen an der Distribution nicht betroffen sind.
Das gewaehlte Installationsverzeichnis - fuer MiKTeX ebenso wie fuer Linux -
wird im Folgenden mit <texmf-local> bezeichnet.
MiKTeX
------
Fuer MiKTeX findet man eine Liste aller bekannten Installationsverzeichnisse
ueber die Menuefolge "Start" -> "Programme" -> "MiKTeX" -> "Maintenance"
-> "Settings" und Wechsel zum Tab "Roots". Damit die von MiKTeX unterhaltenen
Verzeichnisse (Pfade) angezeigt werden (auch selbst angelegte), muss "Show
MiKTeX-maintained root directories" aktiviert sein. Die nicht selbst angelegten
Verzeichnisse beinhalten die Dateien der MiKTeX-Distribution und sollen laut
den Angaben zu MiKTeX nicht fuer eigene Dateien - wie etwa die KIT-Vorlagen -
verwendet werden. Bei den Verzeichnissen, die genutzt werden koennen, wird
"This directory can be used for local additions" angezeigt, wenn man die Maus
auf den angezeigten Pfad bewegt. Existiert kein derartiges Verzeichnis, sollte
ein neues angelegt werden beispielsweise als Unterordner der eigenen Dokumente
und Einstellungen oder - unter einem privilegierten Nutzer wie 'Administrator'
fuer alle am Rechner mit TeX arbeitenden - des parallelen Ordners fuer alle
Nutzer. Dieses Verzeichnis ist anschliessend mit Hilfe der Schaltflaeche
>Add ...< MiKTeX bekannt zu machen.
Linux
-----
Unter Linux kann man sich die Liste der beim Formatieren beruecksichtigten
texmf-Baeume mit dem Befehl
kpsewhich --var-value TEXMF
anzeigen lassen. Angezeigt werden die Wurzeln der zugehoerigen
Verzeichnisbaeume. Verzeichnisbaeume, bei denen nur die "Datenbanken"
(ein rekursives Verzeichnis-Listing) durchsucht wird, werden mit '!!'
eingeleitet; andernfalls wird das Verzeichnis durchsucht. Diese Liste
enthaelt sowohl die Installationsverzeichnisse der Distribution als auch
die lokalen Installationsverzeichnisse sowie den privaten texmf-Baum.
Um nur die lokalen Installationsverzeichnisse anzuzeigen, in die Pakete
wie die KIT-Pakete installiert werden sollten, wird der speziellere Befehl
kpsewhich --var-value TEXMFLOCAL
verwendet. Fuer einen einzelnen Nutzer ist auch eine Installation im privaten
texmf-Baum '~/texmf' moeglich. Die lokalen Installationsverzeichnisse und
der private texmf-Baum sind wie oben erwaehnt von Aenderungen der
Distribution nicht betroffen.
Erforderliche Pakete
====================
Entsprechend den "Gestaltungsrichtlinien" des KIT ist die Schriftart "Arial"
zu verwenden. In den KIT-Dokumentklassen wird daher das Paket 'uarial' mit
dem Befehl '\RequirePackage{uarial}' geladen. Fuer den Formelsatz wird
zusaetzlich das Standard-Paket 'mathpazo' geladen.
Um Briefe, Faxe und wissenschaftliche Poster mit Hilfe der LaTeX-Klassen
'KITbrief', 'KITfax' und 'KITposter' sowie Folien mit der beamer-Klasse
zusammen mit den KIT-Anpassungen formatieren zu koennen, muessen noch
einige weitere LaTeX-Pakete bzw. -Klassen installiert sein. Die folgende
Liste gibt alle benoetigten Pakete an, die LaTeX2e nicht zwingend
voraussetzt:
a0poster | rcs
beamer | refcount
bophook | sciposter
boxedminipage | shadow
dinbrief | tikz (pgf)
hyperref | uarial (arial, urw-arial)
lettrine | xcolor
mathpazo |
Falls ein LaTeX-Paket Teil eines umfangreicheren Paketes mit einem anderen
Namen ist, werden die von MiKTeX oder dem TeX Catalogue verwendeten Namen
zusaetzlich in Klammern angegeben. Fehlen eines oder mehrere dieser Pakete,
installieren Sie die fehlenden bitte mit Hilfe des TeX Installers Ihrer
TeX Installation (des "Package Managers" im Fall von MiKTeX und des Programms
'tlmgr' im Fall einer "TeX Live Distribution"). Falls eine Installation mit
dem TeX Installer nicht moeglich ist, gehen Sie bitte entsprechend den
Beschreibungen der Pakete vor.
Installation des Fonts "Arial"
==============================
Die Gestaltungsrichtlinien legen fest, dass der Font "Arial" zu verwenden
ist. Er unterscheidet sich praktisch nicht vom Font "Helvetica", der im
Unterschied zum vorgeschriebenen Arial-Font Teil jeder TeX-Installation ist.
Da die Fonts nahezu identisch sind wuerde es ausreichen, den Helvetica-Font
unter dem Namen "uarial.sty" zur Verfuegung zu stellen. Um allerdings den
vorgeschriebenen Arial-Font verwenden zu koennen, muss er zusaetzlich
installiert werden. Das Vorgehen bei der Installation haengt ebenfalls von
der verwendeten TeX-Installation ab.
MiKTeX
------
Ziemlich einfach ist die Installation fuer MiKTeX unter Verwendung des
vorgesehenen Mechanismus zur Installation zusaetzlicher Pakete, da das
erforderliche Paket von MiKTeX unterstuetzt wird.
Oeffnen Sie ueber "Start" -> "Programme "Start" -> "MiKTeX" ->
"Package Manager" die Anzeige der von MiKTeX unterstuetzten Pakete. Suchen
Sie unter den aufgefuehrten Paketen nach dem Paket "arial". Sie koennen auch
im Feld Name: 'arial' eingeben und die Schaltflaeche >Filter< betaetigen,
um nur noch das gesuchte Paket anzuzeigen. Falls das Paket bereits
installiert ist, wird u.a. das Installationsdatum angezeigt. Andernfalls
muessen Sie das Paket 'arial' mit der Maus auswaehlen und ueber den Eintrag
<+> oder den Menueeintrag "Task" -> "Install..." installieren. Bitte beachten
Sie, dass in der Regel bei der Installation ein Zugang zum Internet benoetigt
wird. Nachdem die Installation beendet ist, sollte TeX den Font "Arial"
verwenden koennen. Das Paket 'uarial' legt fest, dass der Font "Arial" als
serifenlose Schrift verwendet wird.
Linux
-----
Etwas aufwaendiger als fuer MiKTeX ist die Installation des Fonts "Arial"
fuer Linux. Die Ursache fuer den hoeheren Aufwand liegt darin, dass der
Font nicht automatisch in das TeX-System integriert wird. Zur Installation
empfiehlt sich das folgende Vorgehen:
1. Laden des zip-Archivs fuer den Arial Font:
wget ftp://ftp.dante.de/tex-archive/fonts/urw/arial.zip
2. Entpacken des Archives in ein temporaeres Verzeichnis <temp>
3. Wechsel in das oben gewaehlte texmf-Verzeichnis <texmf-local>
In aelteren Versionen waren die von LaTeX benoetigten Dateien im mit
entpackten zip-Archiv ua1.zip enthalten, das ebenfalls entpackt werden
musste. Diese alten Versionen sollten nicht mehr verwendet werden, und
die Installation wird hier auch nicht weiter beschrieben.
4. Anlegen der folgenden Verzeichnisse:
mkdir -p fonts/afm/urw fonts/tfm/urw fonts/type1/urw fonts/vf/urw \
fonts/map/dvips/ua1 fonts/map/vtex dvips/config doc/fonts
5. Verschieben oder Kopieren der Verzeichnisse 'afm', 'tfm', 'type1' und
'vf' in die entsprechenden angelegten Verzeichnisse:
mv <Dir> fonts/<Dir>/urw/arial
6. Verschieben oder Kopieren des Verzeichnisses 'latex':
mv latex tex/latex/ua1
7. Kopieren und Verschieben der map-Dateien:
cp -p map/ua1.map dvips/config
mv map/ua1.map fonts/map/dvips/ua1
mv map/ua1.ali fonts/map/vtex
8. Installieren der Dokumentation (optional):
mv doc doc/fonts/urw
mv README doc/fonts/urw
9. Aktualisieren des Inhaltsverzeichnisses des texmf-Verzeichnisses:
mktexlsr <texmf-local>
10. Aktivieren der neu installierten Fonts (haeufig sind Root-Privilegien
erforderlich):
updmap-sys --enable Map ua1.map
11. Abschliessende Aktualisierung der Inhaltsverzeichnisse der
texmf-Verzeichnisse (haeufig ebenfalls Root-Privilegien erforderlich):
mktexlsr
Falls bei der Installation keine Fehler aufgetreten sind, sollte nun der
Arial-Font genutzt werden koennen.
Installieren von KIT-Vorlagen
=============================
Sind die benoetigten Pakete installiert, koennen die eigentlichen KIT-Pakete
installiert werden. Sie bestehen - wie oben erwaehnt - aus einem Basispaket
'KITbase.zip' mit den allen KIT-Vorlagen gemeinsamen Dateien und den
eigentlichen Vorlagen, bisher 'KITbrief.zip' fuer Briefe und Faxe,
'KITbeamer.zip' fuer mit der 'beamer'-Klasse erstellte Praesentationen und
'KITposter.zip' fuer wissenschaftliche Poster.
Das Basispaket sollte auf einem moeglichst neuen Stand sein und keinesfalls
aelter als das mitgelieferte Basispaket. Da eine Aktualisierung auf den
WWW-Seiten der Abteilung PKM nur selten erfolgt, enthalten Vorlagen-Dateien
gegebenenfalls auch aktualisierte Versionen zu anderen Dokumenttypen. Die
moeglichen Namen wurden oben bereits erwaehnt, so dass jeder leicht
entscheiden kann, ob zusaetzliche Vorlagen installiert oder aktualisiert
werden sollen oder nicht.
Das Basispaket 'KITbase.zip' und die gewuenschten, gerade erwaehnten
zip-Archive mit den Vorlagen ('KITbrief.zip', 'KITbeamer.zip' und/oder
'KITposter.zip') sollten in der Wurzel des fuer die Installation gewaehlten
texmf-Verzeichnisbaumes <texmf-local> entpackt werden - wie im Folgenden
genauer beschrieben. Abschliessend sind die von den TeX-Programmen
verwendeten Inhaltsverzeichnisse ("Datenbanken") zu aktualisieren (wie
fuer Ihre TeX Installation vorgesehen).
MiKTeX
------
Wechseln Sie in das gewaehlte Installationsverzeichnis <texmf-local> und
entpacken Sie dort die gewuenschten zip-Archive <temp>/KIT*.zip
(<temp>/KITbase.zip / <temp>/KITbrief.zip / <temp>/KITbeamer.zip /
<temp>/KITposter.zip).
Danach muss das Inhaltsverzeichnis (die "Datenbank") des
Installationsverzeichnisses aktualisiert werden. Dazu folgen Sie den
Menues "Start" -> "Programme" -> "MiKTeX" -> "Settings" und wechseln
zum Tab "General". Dort klicken Sie zur Aktualisierung die Schaltflaeche
>Refresh FNDB< an. Danach koennen Sie das Fenster MiKTeX Options durch
Anklicken von >OK< schliessen.
Linux
-----
Wechseln Sie in das Verzeichnis <texmf-local> und entpacken Sie dort die
gewuenschten zip-Archive <temp>/KIT*.zip (<temp>/KITbase.zip /
<temp>/KITbrief.zip} / <temp>/KITbeamer.zip) / <temp>/KITposter.zip).
Die Inhaltsverzeichnisse ("Datenbanken") aller texmf-Verzeichnisse lassen
sich mit dem Befehl
mktexlsr
aktualisieren. Dazu sind in der Regel Root-Privilegien erforderlich.
Stattdessen kann mit dem Befehl
mktexlsr <texmf-local>
nur das Inhaltsverzeichnis des angegebenen texmf-Verzeichnisses <texmf-local>
aktualisiert werden, wobei <texmf-local> dasjenige Verzeichnis ist, in das
die KIT-Archive (z.B. 'KITbrief.zip') ausgepackt wurden.
Beispiele
=========
Zu den Vorlagen enthaelt die Distribution jeweils ein Archiv mit mindestens
einem Beispiel. Der Name des Beispiel-Archivs entsteht aus den Namen der
bereits erwaehnten Vorlagen-Archive durch Anhaengen von "Xmpl", d.h. zu den
Brief- und Faxvorlagen des Archivs 'KITbrief.zip' gehoert das Archiv
'KITbriefXmpl.zip' mit den Beispielen, zu 'KITbeamer.zip' das
Beispiel-Archiv 'KITbeamerXmpl.zip' und zu 'KITposter.zip' das
Beispiel-Archiv 'KITposterXmpl.zip'. Die Beispiele bestehen jeweils aus dem
LaTeX-Quellcode zusammen mit allen zum Formatieren des Beispiels zusaetzlich
zu den Vorlagen benoetigten Dateien und der formatierten PDF-Datei.
Archive mit Beispielen koennen in ein beliebiges - auch temporaeres -
Verzeichnis entpackt werden. Alternativ koennen Sie auch im Verzeichnis
<texmf-local>/doc/latex/KIT entpackt werden; in diesem Fall ist aber zu
beachten, dass zusaetzliche Pakete wie 'blindtext.sty' und 'lipsum.sty' -
beide dienen der Generierung von Pseudotext - nicht mit einer bereits
installierten Version kollidieren und daher besser in ein Verzeichnis
ausserhalb des texmf-Baumes gelegt werden sollten. Falls Sie von den
Beispielen verwendete Zusatzpakete selbst nutzen moechten, sollten Sie
unbedingt diese Pakete selbst installieren (die KIT-Distributionen enthalten
z.B. keine Dokumentationen).
Briefe und Faxe
---------------
Ein Beispiel fuer Briefe ist 'KITbrfXmpl.tex'; es erstellt mehrere ein- und
mehrseitige Briefe. Das entsprechende Beispiel fuer Faxe heisst
'KITfaxXmpl.tex'.
Praesentationen
---------------
Fuer Praesentationen werden mehrere Beispiele angeboten: Das Beispiel zu
PowerPoint ist in 'KIT-Folien-de.tex' umgesetzt und in 'KIT-Folien-en.tex'
ins Englische uebertragen. Die Integration mathematischer Formeln und
unterschiedliche Schriftgroessen zeigt das Beispiel 'KITfolXmpl.tex'.
Poster
------
Fuer Poster gibt es das Beispiel 'KITposXmpl.tex'. Je nach Wahl der
\documentclass-Anweisung koennen deutsche oder englische Poster im Hoch-
und Querformat in unterschiedlichen Groessen erzeugt werden. Andere Formen
von Ueberschriften koennen beispielsweise mit dem Paket 'sectionbox.sty'
erzeugt werden; die entsprechenden Zeilen sind auskommentiert (sie enthalten
die Zeichenkette 'sectionbox'). Fuer Poster im Hochformat enthaelt das
Beispiel eine alternative Titelzeile, die explizit umgebrochen ist (im
Querformat darf der Titel nur eine Zeile lang sein).
Zusaetzlich enthaelt das zip-Archiv mit den Posterbeispielen die beiden
pdf-Beispiele 'KIT-Poster_b0.pdf' im Portrait- und 'KIT-Poster_b0_l.pdf'
im Landscape-Format. Sie enthalten jeweils ineinandergeschachtelt alle
vorgesehenen Postergroessen von A4 bis A0 und B4 bis B0. Da im SCC nur
Poster bis zur maximalen Groesse A0 gedruckt werden koennen, liegen
zusaetzlich die beiden Poster im Format A0 bei, bei denen jeweils die
Groesse B0 fehlt. Da diese Poster nicht in einem Schritt erstellt werden
koennen, liegt der Quellcode nicht bei.
Folien/Install-En.txt 0 → 100644
Installation
Klaus Braune
klaus.braune@kit.edu
Karlsruhe Institute of Technology (KIT)
Steinbuch Centre for Computing
Version 2.0, May 15, 2012
KIT packages
============
KIT packages for TeX are distributed as zip archives containing installation
instructions, the user documentation, a zip archive containing files common
to all KIT packages and two zip archives for every supported document type
- one containing the installation data, the second containing examples. The
distributed zip archive - up to now 'KIT-Vorlagen-Briefe.zip',
'KIT-Vorlagen-Folien.zip', and 'KIT-Vorlagen-Poster.zip' - should be
extracted at a temporary directory which can be removed completely as soon
as the installation task is completed. This temporary directory, where
distributed zip archives are extracted, is called <temp> in the following.
Installation directories
========================
The installation directories differ for different TeX distributions. Here,
the installation directories of MiKTeX version 2.9 and Linux are discussed.
Both distributions treat installation directories of the distribution itself
and local installation directories differently: installation directories of
the distribution are replaced in case of a new installation or occasionally
even in case of an upgrade, whereas local installation directories are not
changed.
Thus, packages belonging to the distribution should be installed at the
installation directories of the distribution in the usual way additional
packages are installed. On the other hand, packages like the KIT packages
should be installed at a local installation directory which is not involved
when the distribution is changed.
In the following the choosen installation directory - in case of MiKTeX as
well as in case of Linux - will be called <texmf-local>.
MiKTeX
------
In case of MiKTeX a list of all known installation directories is available
by opening "Start" -> "Programs" -> "MiKTeX" -> "Maintenance" -> "Settings" and
changing to the tab "Roots". To display the directories (paths) maintained
by MiKTeX (including directories created by the user) "Show MiKTeX-maintained
root directories" must be activated. The directories set up by MiKTeX hold
the files of the MiKTeX distribution and should according to the MiKTeX
documentation not be used to install files not being part of the distribution
like the KIT packages. Directories in the list which can be used to install
additional packages show the information "This directory can be used for
local additions" in case the mouse is moved onto the path displayed. In case
no such directory exists a new one should be created for example as
subdirectory of own documents and settings or - using a privileged user like
'Administrator" to make them available to all users at the computer - of the
corresponding parallel directory for all users. The created directory in
addition must be made known to MiKTeX using the button >Add ...<.
Linux
-----
With Linux a list of the 'texmf' trees inspected while formatting is shown
by the following command:
kpsewhich --var-value TEXMF
Displayed are the roots of the 'texmf' trees. Trees, for which only the
"data base" (a recursive directory listing) is inspected, start with '!!';
other trees are inspected using a recursive directory search. The list
shows as well the installation directories of the distribution as the local
installation directories and the private 'texmf' tree.
To restrict the list to the local installation directories, to which
packages like the KIT packages should be installed, the more specific
command
kpsewhich --var-value TEXMFLOCAL
should be used. In case the installation is only for a single user,
alternatively the private 'texmf' tree '~/texmf' can be used. The local
installation directories and the private 'texmf' tree are not involved by
changes of the distribution as mentioned above.
Required Packages
=================
The "Gestaltungsrichtlinien" of the KIT require to use the font "Arial".
Thus, the KIT document classes do load the package 'uarial' using the
command '\RequirePackage{uarial}'. For formulas, in addition the package
'mathpazo' is loaded.
To format letters, faxes and scientific posters using the LaTeX classes
'KITbrief', 'KITfax' and 'KITposter' and slides using the LaTeX class
'beamer' in combination with the KIT adaptations, some more LaTeX packages
and classes must be installed. The following list names all packages needed
except those required by LaTeX2e:
a0poster | rcs
beamer | refcount
bophook | sciposter
boxedminipage | shadow
dinbrief | tikz (pgf)
hyperref | uarial (arial, urw-arial)
lettrine | xcolor
mathpazo |
If a LaTeX package is part of a package with differing name, the names used
by MiKTeX or the TeX Catalogue are given in addition. In case some of these
packages are missing, please install them using the TeX installer of your
TeX installation (the "Package manager" in case of MiKTeX and 'tlmgr' in
case of a TeX Live distribution). In case an installation using the TeX
installer is not possible, please install the package(s) as specified by
the package description.
Installation of the font "Arial"
================================
According to the "Gestaltungsrichtlinien" of the KIT the font "Arial" is
to be used. However, this font practically does not differ from the font
"Helvetica" which is part of any TeX installation in contrary to the
required Arial font. Since these fonts are nearly identical it would be
sufficient to make the Helvetica font available under the name "uarial.sty".
However, to make the requested Arial font available this font must be
installed in addition. How the installation is done depends on the TeX
installation in use.
MiKTeX
------
The installation for MiKTeX ist straight forward by using the default
mechanism for installation of additional packages, since the package needed
is part of the MiKTeX distribution.
Opening "Start" -> "Programs" -> "MiKTeX" -> "Package Manager" shows the
packages supported by MiKTeX. Look there for the package "arial".
Alternatively, you can restrict the display to the searched package by
entering 'arial' into the field Name: and hitting the Filter button.
In case the package already is installed the installation date is shown.
Otherwise select the package "arial" and press the entry <+> or select
the menu entry "Task" -> "Install..." to install the package. Please be
sure to have access to the internet since in general a network is needed
to install packages. As soon as the installation is finished, TeX should
be able to use the font "Arial". The package 'uarial' requires to use the
font "Arial" as sans serif family.
Linux
-----
A bit more complicated is the installation of the font "Arial" under Linux.
This is caused by the fact that the font itself is not integrated into the
TeX system automatically. To install it, you can proceed as follows:
1. Load the zip archive of the Arial font:
wget ftp://ftp.dante.de/tex-archive/fonts/urw/arial.zip
2. Unpack the archive to a temporary directory called <temp>
3. Change to the 'texmf' directory <texmf-local> choosen above in the
following
At older versions the files needed by LaTeX have been distributed packed
within the zip archive ua1.zip unpacked by the last step. These old
versions should no longer be used, and this instructions are not related to
the old versions.
4. Create the following directories:
mkdir -p fonts/afm/urw fonts/tfm/urw fonts/type1/urw fonts/vf/urw \
fonts/map/dvips/ua1 fonts/map/vtex dvips/config doc/fonts
5. Move or copy the directories 'afm', 'tfm', 'type1', and 'vf' to the
corresponding directories just created:
mv <dir> fonts/<dir>/urw/arial
6. Move or copy the directory 'latex':
mv latex tex/latex/ua1
7. Copy and move the map files:
cp -p map/ua1.map dvips/config
mv map/ua1.map fonts/map/dvips/ua1
mv map/ua1.ali fonts/map/vtex
8. Install the documentation files (optional):
mv doc doc/fonts/urw
mv README doc/fonts/urw
9. Update the list of available TeX files of this 'texmf' directory:
mktexlsr <texmf-local>
10. Integrate the new fonts into the TeX system (often root privileges are
required to do this):
updmap-sys --enable Map ua1.map
11. Finally, update the list of available TeX files again - for all 'texmf'
directories (again, often root privileges are required):
mktexlsr
In case no errors occurred during the installation, now the Arial font can
be used by TeX.
Installing KIT Packages
=======================
With these packages installed, the wanted KIT packages can be installed.
A KIT package consists - as mentioned above - out of the base package
'KITbase.zip' containing data needed by all KIT packages and the packages
itself, up to now 'KITbrief.zip' for letters and faxes, 'KITbeamer.zip'
for presentations created using the 'beamer' class, and 'KITposter.zip'
for scientific Posters.
The base package should be current as far as possible - anyways at least
the version distributed with the current KIT packages. Software on Web
pages of the PKM department are not updated soon after new versions are
available. Thus, versions not already available on PKM pages are distributed
along with other KIT packages. The names of the packages available up to
now are mentioned above. Hence, everybody can decide whether additional
packages are to be installed or not.
The base package 'KITbase.zip' as well as the wanted zip archives
'KITbrief.zip', 'KITbeamer.zip' and/or 'KITposter.zip' should be extracted at
the root of the 'texmf' directory tree <texmf-local>. Finally, the 'data base'
used by the TeX programs must be refreshed (according to your TeX
installation).
MiKTeX
------
Change to the installation directory <texmf-local> choosen above and unpack
there the wanted archives '<temp>/KIT*.zip' ('<temp>/KITbrief.zip' /
\Code{<temp>/KITbrief.zip} / \Code{<temp>/KITbeamer.zip} /
\Code{<temp>/KITposter.zip}).
Now, the list of files within this directory (the 'database') must be updated.
To run the refresh, follow "Start" -> "Programs" -> "MiKTeX" -> "Settings"
and select the tab "General". Klick there on the button >Refresh FNDB<.
Finally, close the window MiKTeX Options by klicking on >OK<.
Linux
-----
Change to the directory '<texmf-local>' and unpack there the wanted
archives '<temp>/KIT*.zip' ('<temp>/KITbase.zip' / '<temp>/KITbrief.zip' /
'<temp>/KITbeamer.zip' / '<temp>/KITposter.zip').
To refresh the 'data bases' for all 'texmf' trees, run
mktexlsr
In general, you will need root privileges to do this. Alternatively, you
can run
mktexlsr <texmf-local>
to refresh the 'data base' of a single 'texmf' tree <texmf-local>, where
<texmf-local> is the directory the KIT archives (e.g. 'KITbrief.zip') have
been unpacked to.
Examples
========
To all KIT packages the distribution contains an archive with at least one
example. The name of the example archive is build from the name of the KIT
archive by appending "Xmpl". Thus, to the letter and fax archive
'KITbrief.zip' belongs the example archive 'KITbriefXmpl.zip', to
'KITbeamer.zip' the example archive 'KITbeamerXmpl.zip' and to
'KITposter.zip' the example archive 'KITposterXmpl.zip'. All examples
consist of the LaTeX source code together with all files needed in
addition to the KIT package when formatting the example, and the formatted
PDF file.
Archives containing examples can be unpacked to any - possibly temporary
- directory. Alternatively, examples can be put to the directory
<texmf-local>/doc/latex/KIT, but in this case be sure that additional
packages like 'blindtext.sty' and 'lipsum.sty' - both used to generate
pseudo text - do not collide with a previously installed version. Thus,
any additional packages from the example archive should be placed at
a directory outside the 'texmf' tree. In case you want to use some of these
additional packages yourself you should install it separately (since the
KIT distributions e.g. do not contain documentation).
Letters and Faxes
-----------------
The example for KIT letters is 'KITbrfXmpl.tex' and generates some letters
of one and more pages. The corresponding example for faxes is
'KITfaxXmpl.tex'.
Presentations
-------------
For presentations three examples are offered: The PowerPoint example is
available at 'KIT-Folien-de.tex' and its English version at
'KIT-Folien-en.tex'. The integration of mathematical formulas as well as
different font sizes are shown by the example 'KITfolXmpl.tex'.
Posters
-------
For posters the example 'KITposXmpl.tex' is provided. Depending on the
selected \documentclass command German or English portrait or landscape
posters can be generated at different sizes. Variants of headings can be
used e.g. by using the package 'sectionbox.sty'; the corresponding lines
are present as comments (containing the string 'sectionbox'). For
portrait posters the example provides an alternate title with an explicit
linebreak (in case of landscape posters the title must be not longer than
a single line).
In addition two pdf examples - the portrait poster 'KIT-Poster_b0.pdf' and
the landscape poster 'KIT-Poster_b0_l.pdf' - are part of the zip archive
with poster examples. Both posters show all supported poster sizes A4 to
A0 and B4 to B0 combined within a single poster. Since at the SCC only
posters up to size A0 can be printed, in addition the two A0 size posters
are included, where the size B0 is skipped. Since these posters can not
be generated by a single step, the source is not included.
Folien/KITbase/tex/latex/KIT/KITcolors.sty 0 → 100644
%%
%% This is file `KITcolors.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITgeneral.dtx (with options: `colors')
%%
%% This is a generated file.
%%
%% Copyright (C) 2008, 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/06 10:15:33 $
\RCS $Revision: 1.4 $
\ProvidesPackage{KITcolors}
[\RCSRawDate\space v\RCSRevision\space KIT specific color definitions]
\newif\ifKIT@cmyk\KIT@cmyktrue
\DeclareOption{cmyk}{\KIT@cmyktrue}
\DeclareOption{rgb}{\KIT@cmykfalse}
\ProcessOptions
\RequirePackage{xcolor}
\ifKIT@cmyk
\definecolor{KITgreen} {cmyk}{ 1,0,.60,0} % 100% green
\definecolor{KITgreen70}{cmyk}{.70,0,.42,0} % 70% green
\definecolor{KITgreen50}{cmyk}{.50,0,.30,0} % 50% green
\definecolor{KITgreen30}{cmyk}{.30,0,.18,0} % 30% green
\definecolor{KITgreen15}{cmyk}{.15,0,.09,0} % 15% green
\else
\definecolor{KITgreen} {RGB}{ 0,150,130} % 100% green
\definecolor{KITgreen70}{RGB}{ 76,181,167} % 70% green
\definecolor{KITgreen50}{RGB}{127,202,192} % 50% green
\definecolor{KITgreen30}{RGB}{178,223,217} % 30% green
\definecolor{KITgreen15}{RGB}{217,239,236} % 15% green
\fi
\colorlet{KIT-Gruen}{KITgreen}
\colorlet{KIT-Gruen70}{KITgreen70}
\colorlet{KIT-Gruen50}{KITgreen50}
\colorlet{KIT-Gruen30}{KITgreen30}
\colorlet{KIT-Gruen15}{KITgreen15}
\ifKIT@cmyk
\definecolor{KITblue} {cmyk}{.80,.500,0,0} % 100% blue
\definecolor{KITblue70}{cmyk}{.56,.350,0,0} % 70% blue
\definecolor{KITblue50}{cmyk}{.40,.250,0,0} % 50% blue
\definecolor{KITblue30}{cmyk}{.24,.150,0,0} % 30% blue
\definecolor{KITblue15}{cmyk}{.12,.075,0,0} % 15% blue
\else
\definecolor{KITblue} {RGB}{ 70,100,170} % 100% blue
\definecolor{KITblue70}{RGB}{125,146,195} % 70% blue
\definecolor{KITblue50}{RGB}{162,177,212} % 50% blue
\definecolor{KITblue30}{RGB}{199,208,229} % 30% blue
\definecolor{KITblue15}{RGB}{227,232,242} % 15% blue
\fi
\colorlet{KIT-Blau}{KITblue}
\colorlet{KIT-Blau70}{KITblue70}
\colorlet{KIT-Blau50}{KITblue50}
\colorlet{KIT-Blau30}{KITblue30}
\colorlet{KIT-Blau15}{KITblue15}
\ifKIT@cmyk
\definecolor{KITblack} {cmyk}{0,0,0, 1} % 100% black
\definecolor{KITblack70}{cmyk}{0,0,0,.70} % 70% black
\definecolor{KITblack50}{cmyk}{0,0,0,.50} % 50% black
\definecolor{KITblack30}{cmyk}{0,0,0,.30} % 30% black
\definecolor{KITblack15}{cmyk}{0,0,0,.15} % 15% black
\else
\definecolor{KITblack} {RGB}{ 0, 0, 0} % 100% black
\definecolor{KITblack70}{RGB}{ 77, 77, 77} % 70% black
\definecolor{KITblack50}{RGB}{128,128,128} % 50% black
\definecolor{KITblack30}{RGB}{179,179,179} % 30% black
\definecolor{KITblack15}{RGB}{217,217,217} % 15% black
\fi
\ifKIT@cmyk
\definecolor{KITpalegreen}{cmyk}{.6,0,1,0}
\else
\definecolor{KITpalegreen}{RGB}{130,190,60}
\fi
\colorlet{KITpalegreen70}{KITpalegreen!70}
\colorlet{KITpalegreen50}{KITpalegreen!50}
\colorlet{KITpalegreen30}{KITpalegreen!30}
\colorlet{KITpalegreen15}{KITpalegreen!15}
\colorlet{KIT-Maigruen}{KITpalegreen}
\colorlet{KIT-Maigruen70}{KITpalegreen70}
\colorlet{KIT-Maigruen50}{KITpalegreen50}
\colorlet{KIT-Maigruen30}{KITpalegreen30}
\colorlet{KIT-Maigruen15}{KITpalegreen15}
\ifKIT@cmyk
\definecolor{KITyellow}{cmyk}{0,.05,1,0}
\else
\definecolor{KITyellow}{RGB}{250,230,20}
\fi
\colorlet{KITyellow70}{KITyellow!70}
\colorlet{KITyellow50}{KITyellow!50}
\colorlet{KITyellow30}{KITyellow!30}
\colorlet{KITyellow15}{KITyellow!15}
\colorlet{KIT-Gelb}{KITyellow}
\colorlet{KIT-Gelb70}{KITyellow70}
\colorlet{KIT-Gelb50}{KITyellow50}
\colorlet{KIT-Gelb30}{KITyellow30}
\colorlet{KIT-Gelb15}{KITyellow15}
\ifKIT@cmyk
\definecolor{KITorange}{cmyk}{0,.45,1,0}
\else
\definecolor{KITorange}{RGB}{220,160,30}
\fi
\colorlet{KITorange70}{KITorange!70}
\colorlet{KITorange50}{KITorange!50}
\colorlet{KITorange30}{KITorange!30}
\colorlet{KITorange15}{KITorange!15}
\colorlet{KIT-Orange}{KITorange}
\colorlet{KIT-Orange70}{KITorange70}
\colorlet{KIT-Orange50}{KITorange50}
\colorlet{KIT-Orange30}{KITorange30}
\colorlet{KIT-Orange15}{KITorange15}
\ifKIT@cmyk
\definecolor{KITbrown}{cmyk}{.35,.5,1,0}
\else
\definecolor{KITbrown}{RGB}{160,130,50}
\fi
\colorlet{KITbrown70}{KITbrown!70}
\colorlet{KITbrown50}{KITbrown!50}
\colorlet{KITbrown30}{KITbrown!30}
\colorlet{KITbrown15}{KITbrown!15}
\colorlet{KIT-Braun}{KITbrown}
\colorlet{KIT-Braun70}{KITbrown70}
\colorlet{KIT-Braun50}{KITbrown50}
\colorlet{KIT-Braun30}{KITbrown30}
\colorlet{KIT-Braun15}{KITbrown15}
\ifKIT@cmyk
\definecolor{KITred}{cmyk}{.25,1,1,0}
\else
\definecolor{KITred}{RGB}{160,30,40}
\fi
\colorlet{KITred70}{KITred!70}
\colorlet{KITred50}{KITred!50}
\colorlet{KITred30}{KITred!30}
\colorlet{KITred15}{KITred!15}
\colorlet{KIT-Rot}{KITred}
\colorlet{KIT-Rot70}{KITred70}
\colorlet{KIT-Rot50}{KITred50}
\colorlet{KIT-Rot30}{KITred30}
\colorlet{KIT-Rot15}{KITred15}
\ifKIT@cmyk
\definecolor{KITlilac}{cmyk}{.25,1,0,0}
\else
\definecolor{KITlilac}{RGB}{160,0,120}
\fi
\colorlet{KITlilac70}{KITlilac!70}
\colorlet{KITlilac50}{KITlilac!50}
\colorlet{KITlilac30}{KITlilac!30}
\colorlet{KITlilac15}{KITlilac!15}
\colorlet{KIT-Lila}{KITlilac}
\colorlet{KIT-Lila70}{KITlilac70}
\colorlet{KIT-Lila50}{KITlilac50}
\colorlet{KIT-Lila30}{KITlilac30}
\colorlet{KIT-Lila15}{KITlilac15}
\ifKIT@cmyk
\definecolor{KITcyanblue}{cmyk}{.9,.05,0,0}
\else
\definecolor{KITcyanblue}{RGB}{80,170,230}
\fi
\colorlet{KITcyanblue70}{KITcyanblue!70}
\colorlet{KITcyanblue50}{KITcyanblue!50}
\colorlet{KITcyanblue30}{KITcyanblue!30}
\colorlet{KITcyanblue15}{KITcyanblue!15}
\colorlet{KIT-Cyan-Blau}{KITcyanblue}
\colorlet{KIT-Cyan-Blau70}{KITcyanblue70}
\colorlet{KIT-Cyan-Blau50}{KITcyanblue50}
\colorlet{KIT-Cyan-Blau30}{KITcyanblue30}
\colorlet{KIT-Cyan-Blau15}{KITcyanblue15}
\colorlet{KITolive}{KITpalegreen}
\colorlet{KITmagenta}{KITlilac}
\colorlet{KITcyan}{KITcyanblue}
\ifKIT@cmyk
\definecolor{KITseablue}{cmyk}{.35294,.23529,0,.45097}
\else
\definecolor{KITseablue}{RGB}{50,80,140}
\fi
\colorlet{KITrframe}{KITblack50}
\colorlet{KITmframe}{KITblack15}
\newif\ifKIT@bw\KIT@bwtrue
\newif\ifKIT@De
\newcommand{\BW}{%
\KIT@bwtrue
\colorlet{KITheadbg}{KITblack50}
\ifKIT@De\let\KIT@logo=\KIT@logo@bwD
\else\let\KIT@logo=\KIT@logo@bwE
\fi
\expandafter\ifx\csname labelitemi\endcsname\relax\else
\renewcommand{\labelitemi}{\resizebox{1ex}{1ex}{\KIT@marksymbol[KITblack]}}
\fi
}
\let\SW=\BW
\newcommand{\Color}{%
\KIT@bwfalse
\colorlet{KITheadbg}{KITblue}
\ifKIT@De\let\KIT@logo=\KIT@logo@clrD
\else\let\KIT@logo=\KIT@logo@clrE
\fi
\expandafter\ifx\csname labelitemi\endcsname\relax\else
\let\labelitemi=\KIT@mark
\fi
}
\let\Farbe=\Color
\ifKIT@cmyk
\gdef\KIT@logo@clrD{kit_logo_de_4c_positiv}
\gdef\KIT@logo@iclrD{kit_logo_de_4c_negativ}
\gdef\KIT@logo@clrE{kit_logo_en_4c_positiv}
\gdef\KIT@logo@iclrE{kit_logo_en_4c_negativ}
\else
\gdef\KIT@logo@clrD{kit_logo_de_4c_positiv-rgb}
\gdef\KIT@logo@iclrD{kit_logo_de_4c_negativ-rgb}
\gdef\KIT@logo@clrE{kit_logo_en_4c_positiv-rgb}
\gdef\KIT@logo@iclrE{kit_logo_en_4c_negativ-rgb}
\fi
\gdef\KIT@logo@bwD{kit_logo_de_1c_schwarz}
\gdef\KIT@logo@ibwD{kit_logo_de_1c_weiss}
\gdef\KIT@logo@bwE{kit_logo_en_1c_schwarz}
\gdef\KIT@logo@ibwE{kit_logo_en_1c_weiss}
\gdef\KIT@logo{KITlogo_RGB_frutiger_RGB}
\gdef\KIT@logos{KITlogo_sw_frutiger_CMYK}
\gdef\KIT@logow{KITlogo_weiss_frutiger_CMYK}
\gdef\KIT@logowg{KITlogo_weiss_gruen_frutiger_CMYK}
\ifKIT@cmyk
\gdef\KIT@logo@clrOZ{KITlogo_4c_frutiger_CMYK-OZ}
\gdef\KIT@logo@iclrOZ{KITlogo_4c_weiss_frutiger_CMYK-OZ}
\else
\gdef\KIT@logo@clrOZ{KITlogo_4c_frutiger_RGB-OZ}
\gdef\KIT@logo@iclrOZ{KITlogo_4c_weiss_frutiger_RGB-OZ}
\fi
\let\KIT@logoOZ=\KIT@logo@clrOZ
\gdef\KIT@logo@bwOZ{KITlogo_sw_frutiger_CMYK-OZ}
\let\KIT@logoOZs=\KIT@logo@bwOZ
\gdef\KIT@logo@ibwOZ{KITlogo_weiss_frutiger_CMYK-OZ}
\let\KIT@logoOZw=\KIT@logo@ibwOZ
\gdef\FZK@logo{FZK-logo-re-SW}
\gdef\UKA@logo{Wortbildmarke_schwarz}
\let\FZKlogo=\FZK@logo
\let\KITlogo=\KIT@logo
\let\UKAlogo=\UKA@logo
\endinput
%%
%% End of file `KITcolors.sty'.
Folien/KITbase/tex/latex/KIT/KITdefs.sty 0 → 100644
%%
%% This is file `KITdefs.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITgeneral.dtx (with options: `definitions')
%%
%% This is a generated file.
%%
%% Copyright (C) 2008, 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/06 10:15:33 $
\RCS $Revision: 1.4 $
\ProvidesPackage{KITdefs}
[\RCSRawDate\space v\RCSRevision\space Common KIT specific definitions]
\RequirePackage{tikz}
\newcommand{\KIT@Name@D}{Karlsruher Institut f\"ur Technologie (KIT)}
\newcommand{\KIT@Name@E}{Karlsruhe Institute of Technology (KIT)}
\newcommand{\KIT@Text@D}{KIT -- Universit\"at des Landes Baden-W\"urttemberg
und nationales Forschungszentrum in der Helmholtz-Gemeinschaft}
\newcommand{\KIT@Text@E}{KIT -- University of the State of Baden-Wuerttemberg
and National Research Center of the Helmholtz Association}
\gdef\KIT@Street{Kaiserstra\ss{}e 12}
\gdef\KIT@Place{76131 Karlsruhe}
\gdef\KIT@CntryD{Deutschland}
\gdef\KIT@CntryE{Germany}
\let\KIT@Cntry=\KIT@CntryD
\let\KIT@Str=\relax
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\newcommand{\Street}[1]{\gdef\KIT@Str{{#1}}}
\fi
\let\Strasse=\Street
\let\KIT@Ort=\relax
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\newcommand{\Place}[1]{\gdef\KIT@Ort{{#1}}}
\fi
\let\place=\Place
\let\Ort=\Place
\gdef\KIT@Web{www.kit.edu}
\let\KIT@www=\KIT@Web
\newcommand{\KITURL}[1]{\gdef\KIT@Web{{#1}}}
\let\KIT@WebTxt=\relax
\gdef\KIT@wtext@D{Web}
\gdef\KIT@wtext@E{Web}
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\newcommand{\WWW}[1]{\gdef\KIT@PWWW{{#1}}}
\fi
\let\KIT@PWWW=\KIT@Web
\gdef\KIT@EmlDomain{@kit.edu}
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\newcommand{\EmailDomain}[1]{\gdef\KIT@EmlDomain{{#1}}}
\fi
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\newcommand{\EmailName}[1]{\gdef\KIT@EmlName{{#1}}}
\fi
\let\KIT@EmlTxt=\relax
\let\KIT@EmlName=\relax
\AtBeginDocument{%
\expandafter\ifx\csname labelitemi\endcsname\relax\else
\expandafter\ifx\csname KIT@State\endcsname\relax\else
\let\labelitemiv=\labelitemiii
\let\labelitemiii=\labelitemii
\let\labelitemii=\labelitemi
\ifKIT@bw
\def\labelitemi{\resizebox{1ex}{1ex}{\KIT@marksymbol[KITblack]}}
\else
\def\labelitemi{\makebox[.65em][l]{\KIT@mark}}
\fi
\addtolength{\leftmargini}{.1em}
\addtolength{\leftmarginii}{.2em}
\addtolength{\leftmarginiii}{.3em}
\addtolength{\leftmarginiv}{.4em}
\fi
\fi}
\newsavebox{\KIT@titimg}
\newlength{\KIT@titimgwd}
\newcommand{\KIT@pgftext}[5][KITblack]{%
\textcolor{#1}{\fontfamily{\KIT@fam}\fontsize{#2}{#3}%
\fontseries{#4}\upshape#5}%
}
\newcommand{\KITtitleimage}[2][\relax]{%
\ifx#1\relax
\sbox{\KIT@titimg}{\includegraphics[width=\KIT@titimgwd]{#2}}
\else
\sbox{\KIT@titimg}{\includegraphics[#1,width=\KIT@titimgwd]{#2}}
\fi}
\let\KITtitelbild=\KITtitleimage
\newcommand{\TitleImage}[2][\relax]{%
\ifx#1\relax
\sbox{\KIT@titimg}{\includegraphics{#2}}
\else
\sbox{\KIT@titimg}{\includegraphics[#1]{#2}}
\fi}
\gdef\KIT@today@TD{\number\day.\space\ifcase\month\or Januar\or Februar\or
{M\"arz}\or April\or Mai\or Juni\or Juli\or August\or September\or Oktober\or
November\or Dezember\fi\space\number\year}
\gdef\KIT@today@TE{\ifcase\month\or January\or February\or March\or April\or
May\or June\or July\or August\or September\or October\or November\or
December\fi\space\number\day,\space\number\year}
\let\ttoday=\KIT@today@TD
\gdef\KIT@today@ND{%
\ifnum\number\day<10{0}\fi\number\day.%
\ifnum\number\month<10{0}\fi\number\month.%
\ifnum\number\year<10{0}\fi\number\year}
\gdef\KIT@today@NE{%
\ifnum\number\year<10{0}\fi\number\year-%
\ifnum\number\month<10{0}\fi\number\month-%
\ifnum\number\day<10{0}\fi\number\day}
\let\ntoday=\KIT@today@ND
\gdef\@date{\phantom{0}}
\gdef\KIT@date{\ttoday}
\let\KIT@DatTxt=\relax
\gdef\DateNumbers{\gdef\KIT@date{\ntoday}}
\gdef\DateText{\gdef\KIT@date{\ttoday}}
\gdef\date#1{\gdef\KIT@date{#1}}
\let\Datum=\date
\newcommand{\KIT@German}{%
\let\KIT@Cntry=\KIT@CntryD
\let\KIT@Name=\KIT@Name@D
\let\KIT@name=\KIT@Name@D
\let\KIT@Text=\KIT@Text@D
\let\KIT@text=\KIT@Text@D
\let\KIT@WebTxt=\KIT@wtext@D
\let\ntoday=\KIT@today@ND
\let\ttoday=\KIT@today@TD
}
\newcommand{\KIT@English}{%
\let\KIT@Cntry=\KIT@CntryE
\let\KIT@Name=\KIT@Name@E
\let\KIT@name=\KIT@Name@E
\let\KIT@Text=\KIT@Text@E
\let\KIT@text=\KIT@Text@E
\let\KIT@WebTxt=\KIT@wtext@E
\let\ntoday=\KIT@today@NE
\let\ttoday=\KIT@today@TE
}
\KIT@German
\newlength{\KIT@Framewd}
\newlength{\KIT@RFramewd}
\newlength{\KIT@Linewd}
\newlength{\KIT@MFllx}
\newlength{\KIT@MFlly}
\newlength{\KIT@MFurx}
\newlength{\KIT@MFury}
\newcommand{\KIT@MFrame}[1][0mm]{%
\fill[KITmframe] (\KIT@MFllx,\KIT@MFury)
-- (\KIT@MFllx,\KIT@MFlly) -- (\KIT@MFurx,\KIT@MFlly)
-- (\KIT@MFurx,\KIT@MFury) -- (\KIT@MFllx,\KIT@MFury)
-- (\KIT@MFllx+\KIT@Framewd,\KIT@MFury-\KIT@Framewd)
-- (\KIT@MFurx-2\KIT@Framewd,\KIT@MFury-\KIT@Framewd)
arc( 90: 0:\KIT@Framewd)
-- (\KIT@MFurx-\KIT@Framewd,\KIT@MFlly+\KIT@Framewd+#1)
-- (2\KIT@Framewd,\KIT@MFlly+\KIT@Framewd+#1)
arc(270:180:\KIT@Framewd)
-- (\KIT@MFllx+\KIT@Framewd,\KIT@MFury-\KIT@Framewd) -- cycle;
}
\newcommand{\KIT@MFrameMOD}[1][0mm]{%
\fill[KITmframe] (0mm,\paperheight)
-- (0mm,0mm) -- (\paperwidth,0mm)
-- (\paperwidth,\paperheight) -- (0mm,\paperheight)
-- (\KIT@Framewd,\paperheight-\KIT@Framewd)
-- (\paperwidth-2\KIT@Framewd,\paperheight-\KIT@Framewd)
arc( 90: 0:\KIT@Framewd)
-- (\paperwidth-\KIT@Framewd,\KIT@Framewd+#1)
-- (2\KIT@Framewd,\KIT@Framewd+#1)
arc(270:180:\KIT@Framewd)
-- (\KIT@Framewd,\paperheight-\KIT@Framewd) -- cycle;
}
\newcommand{\KIT@MFrameRA}[1][0mm]{%
\draw[KITrframe,line width=\KIT@RFramewd] (\KIT@MFllx+#1,\KIT@MFury)
-- (\KIT@MFllx+#1,\KIT@MFlly+\KIT@Framewd)
arc(180:270:\KIT@Framewd)
-- (\KIT@MFurx+#1,\KIT@MFlly)
-- (\KIT@MFurx+#1,\KIT@MFury-\KIT@Framewd)
arc( 0: 90:\KIT@Framewd) -- cycle;
}
\newcommand{\KIT@MFhdr}[5][0mm]{%
\fill[KITheadbg] (#2+#1,#5)
-- (#2+#1,#5-\KIT@MFHdh)
-- (#4+#1,#5-\KIT@MFHdh)
-- (#4+#1,#5-\KIT@Framewd)
arc(0:90:\KIT@Framewd) -- cycle;
}
\newcommand{\KIT@marksymbol}[1][KITgreen]{%
\tikz \filldraw[#1] (0cm,7cm)
-- (0cm,2cm) arc(180:270:2cm) -- (7cm,0cm)
-- (7cm,5cm) arc( 0: 90:2cm) -- cycle;}
\let\KITmark=\KIT@marksymbol
\newcommand{\KIT@mark}[1][KITgreen]{\resizebox{1ex}{1ex}{\KIT@marksymbol[#1]}}
\newsavebox{\KIT@sbx}
\newlength{\vgdist}
\setlength{\vgdist}{0mm}
\newlength{\KIT@tlen}
\newlength{\KIT@tlenA}
\newcommand{\KIT@Box}[1][\relax]{%
\KIT@tlen=\ht\KIT@sbx%
\KIT@tlenA=\dp\KIT@sbx%
\addtolength{\KIT@tlen}{\KIT@tlenA}% height of image
\addtolength{\KIT@tlen}{2\vgdist}% height of image + distance
\KIT@tlenA=\wd\KIT@sbx% width of image
\addtolength{\KIT@tlenA}{2\vgdist}% width of image + distance
\begin{tikzpicture}
\clip (0pt,\KIT@tlen+2\KIT@Linewd)
-- (0pt,\KIT@Framewd+.5\KIT@Linewd)
arc(180:270:\KIT@Framewd+.5\KIT@Linewd)
-- (\KIT@tlenA+2\KIT@Linewd,0pt)
-- (\KIT@tlenA+2\KIT@Linewd,\KIT@tlen-\KIT@Framewd+1.5\KIT@Linewd)
arc(0:90:\KIT@Framewd+.5\KIT@Linewd) -- cycle;
\ifx#1\relax\relax\else
\fill[KITblack15] (.5\KIT@Linewd,.5\KIT@Linewd)
rectangle (\KIT@tlenA+1.5\KIT@Linewd,\KIT@tlen+1.5\KIT@Linewd);
\fi
\pgftext[at=\pgfpoint{\vgdist+\KIT@Linewd}{\vgdist+\KIT@Linewd},left,bottom]{%
\usebox{\KIT@sbx}}
\draw[KITblack50,line width=\KIT@Linewd]
(.5\KIT@Linewd,\KIT@tlen+1.5\KIT@Linewd)
-- (.5\KIT@Linewd,\KIT@Framewd+.5\KIT@Linewd)
arc(180:270:\KIT@Framewd)
-- (\KIT@tlenA+1.5\KIT@Linewd,.5\KIT@Linewd)
-- (\KIT@tlenA+1.5\KIT@Linewd,\KIT@tlen-\KIT@Framewd+1.5\KIT@Linewd)
arc(0:90:\KIT@Framewd) -- cycle;
\end{tikzpicture}%
}
\def\KIT@mcolmain{%
\let\KIT@WF@warning=\WF@collision
\setcounter{collectmore}{-8}
\renewenvironment{figure}[1][\relax]{%
\gdef\KIT@wrap@opt{L}
\ifx##1\relax \relax
\else
\expandafter\KIT@search{h}{##1}
\ifKIT@match\gdef\KIT@wrap@opt{l}\fi
\fi
\begin{wrapfigure}{\KIT@wrap@opt}{\columnwidth}
}{%
\end{wrapfigure}
\let\WF@collision=\relax
\begin{wrapfigure}[0]{\KIT@wrap@opt}{\columnwidth}
\end{wrapfigure}
\rule{0pt}{0pt}%
\let\WF@collision=\KIT@WF@warning
\vspace{\KITintextsep}
\par
}
\renewenvironment{table}[1][\relax]{%
\gdef\KIT@wrap@opt{L}
\ifx##1\relax \relax
\else
\expandafter\KIT@search{h}{##1}
\ifKIT@match\gdef\KIT@wrap@opt{l}\fi
\fi
\begin{wraptable}{\KIT@wrap@opt}{\columnwidth}
}{%
\end{wraptable}
\let\WF@collision=\relax
\begin{wraptable}[0]{\KIT@wrap@opt}{\columnwidth}
\end{wraptable}
\rule{0pt}{0pt}
\let\WF@collision=\KIT@WF@warning
\vspace{\KITintextsep}
\par
}
}
\def\KIT@mtwocol{%
\KIT@mcolmain%
\renewcommand{\onecolumn}{\end{multicols}\clearpage}
\renewcommand{\twocolumn}[1][\relax]{\clearpage
\if##1\relax\begin{multicols}{2}\else\begin{multicols}{2}[##1]\fi}
\AtBeginDocument{\begin{multicols}{2}}
\AtEndDocument{\end{multicols}}
}
\newlength{\KITintextsep}
\setlength{\KITintextsep}{-1.2\baselineskip}
\newcommand{\KITimage}[2][\relax]{%
\ifx#1\relax
\sbox{\KIT@sbx}{\includegraphics{#2}}
\else
\sbox{\KIT@sbx}{\includegraphics[#1]{#2}}
\fi
\KIT@Box%
}
\let\KITbild=\KITimage
\newcommand{\KITvectorgraphics}[2][\relax]{%
\ifx#1\relax
\sbox{\KIT@sbx}{\includegraphics{#2}}
\else
\sbox{\KIT@sbx}{\includegraphics[#1]{#2}}
\fi
\KIT@Box[bg]%
}
\let\KITvektorgrafik=\KITvectorgraphics
\newcommand{\KITframe}[2][\relax]{%
\sbox{\KIT@sbx}{#2}
\ifx#1\relax
\KIT@Box%
\else
\KIT@Box[bg]%
\fi%
}
\let\KITrahmen=\KITframe
\endinput
%%
%% End of file `KITdefs.sty'.
Folien/KITbase/tex/latex/KIT/KITmcfloat.sty 0 → 100644
%%
%% This is file `KITmcfloat.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITgeneral.dtx (with options: `scfloats')
%%
%% This is a generated file.
%%
%% Copyright (C) 2008, 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/06 10:15:33 $
\RCS $Revision: 1.4 $
\ProvidesPackage{KITmcfloat}
[\RCSRawDate\space v\RCSRevision\space KIT specific support of user defined (single column) floats with multicols environments]
\RequirePackage{multicol}
\RequirePackage{float}
\RequirePackage{wrapfig}
\RequirePackage{KITdefs}
\KIT@mtwocol
\def\KIT@nflwithin#1[#2]{%
\expandafter\gdef\csname KIT@#1@hook\endcsname{%
\expandafter\gdef\csname the#1\endcsname{%
\csname the#2\endcsname.\arabic{#1}}%
}%
}
\let\KIT@newfloat=\newfloat
\renewcommand\newfloat[3]{%
\KIT@newfloat{#1}{#2}{#3}
\expandafter\let\csname KIT@#1@hook\endcsname=\relax
\renewenvironment{#1}[1][\relax]{%
\csname KIT@#1@hook\endcsname
\expandafter\let\csname KIT@#1@hook\endcsname=\relax
\gdef\KIT@wrap@opt{L}
\ifx##1\relax \relax
\else
\expandafter\KIT@search{h}{##1}
\ifKIT@match\gdef\KIT@wrap@opt{l}\fi
\fi
\begin{wrap#1}{\KIT@wrap@opt}{\columnwidth}
}{%
\end{wrap#1}
\let\WF@collision=\relax
\begin{wrap#1}[0]{\KIT@wrap@opt}{\columnwidth}
\end{wrap#1}
\rule{0pt}{0pt}%
\let\WF@collision=\KIT@WF@warning
\vspace{\KITintextsep}
\par
}%
\@ifnextchar[{\KIT@nflwithin{#1}}{\relax}
}%
\newif\ifKIT@match
\def\KIT@eos{;}
\def\KIT@search#1#2{\KIT@matchfalse
\expandafter\expandafter\expandafter\KIT@se@rch
\expandafter#1#2\KIT@eos}
\def\KIT@se@rch#1{\bgroup
\def\KIT@target{#1}\KIT@nextchar}
\def\KIT@nextchar#1{%
\let\KIT@next=\KIT@nextchar
\if#1\KIT@target
\global\KIT@matchtrue
\else
\if#1\KIT@eos
\let\KIT@next=\KIT@finished
\fi
\fi
\KIT@next}
\def\KIT@finished{\egroup}
\endinput
%%
%% End of file `KITmcfloat.sty'.
Folien/KITbeamer/tex/latex/KIT/KIT16.clo 0 → 100644
%%
%% This is file `KIT16.clo',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `16pt')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesFile{KIT16.clo}
[\RCSRawDate\space v\RCSRevision\space Size option for KIT beamer slides]
\renewcommand\normalsize{%
\@setfontsize\normalsize{15.6\KIT@pt}{20\KIT@pt}%
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\belowdisplayskip \abovedisplayskip
\let\@listi\@listI}
\normalsize
\renewcommand\small{%
\@setfontsize\small{15.1\KIT@pt}{18\KIT@pt}%
\abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus2\p@
\belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 4\p@ \@plus2\p@ \@minus2\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\footnotesize{%
\@setfontsize\footnotesize{13.8\KIT@pt}{17\KIT@pt}%
\abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus\p@
\belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 3\p@ \@plus\p@ \@minus\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\scriptsize{\@setfontsize\scriptsize{11.5\KIT@pt}{13\KIT@pt}}
\renewcommand\tiny{\@setfontsize\tiny{8\KIT@pt}{9.5\KIT@pt}}
\renewcommand\large{\@setfontsize\large{18.1\KIT@pt}{21.6\KIT@pt}}
\renewcommand\Large{\@setfontsize\Large{20.4\KIT@pt}{24.1\KIT@pt}}
\renewcommand\LARGE{\@setfontsize\LARGE{24.5\KIT@pt}{28.5\KIT@pt}}
\renewcommand\huge{\@setfontsize\huge{29.4\KIT@pt}{33.5\KIT@pt}}
\renewcommand\Huge{\@setfontsize\Huge{35.2\KIT@pt}{39.5\KIT@pt}}
\endinput
%%
%% End of file `KIT16.clo'.
Folien/KITbeamer/tex/latex/KIT/KIT18.clo 0 → 100644
%%
%% This is file `KIT18.clo',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `18pt')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesFile{KIT18.clo}
[\RCSRawDate\space v\RCSRevision\space Size option for KIT beamer slides]
\renewcommand\normalsize{%
\@setfontsize\normalsize{18.1\KIT@pt}{21.6\KIT@pt}%
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\belowdisplayskip \abovedisplayskip
\let\@listi\@listI}
\normalsize
\renewcommand\small{%
\@setfontsize\small{16.5\KIT@pt}{20\KIT@pt}%
\abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus2\p@
\belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 4\p@ \@plus2\p@ \@minus2\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\footnotesize{%
\@setfontsize\footnotesize{15.1\KIT@pt}{18\KIT@pt}%
\abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus\p@
\belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 3\p@ \@plus\p@ \@minus\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\scriptsize{\@setfontsize\scriptsize{12.6\KIT@pt}{15.5\KIT@pt}}
\renewcommand\tiny{\@setfontsize\tiny{9\KIT@pt}{11\KIT@pt}}
\renewcommand\large{\@setfontsize\large{20.4\KIT@pt}{24.1\KIT@pt}}
\renewcommand\Large{\@setfontsize\Large{22.3\KIT@pt}{26\KIT@pt}}
\renewcommand\LARGE{\@setfontsize\LARGE{26.8\KIT@pt}{30.5\KIT@pt}}
\renewcommand\huge{\@setfontsize\huge{32.2\KIT@pt}{36\KIT@pt}}
\renewcommand\Huge{\@setfontsize\Huge{38.6\KIT@pt}{42.5\KIT@pt}}
\endinput
%%
%% End of file `KIT18.clo'.
Folien/KITbeamer/tex/latex/KIT/KIT20.clo 0 → 100644
%%
%% This is file `KIT20.clo',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `20pt')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesFile{KIT20.clo}
[\RCSRawDate\space v\RCSRevision\space Size option for KIT beamer slides]
\renewcommand\normalsize{%
\@setfontsize\normalsize{20.4\KIT@pt}{24.1\KIT@pt}%
\abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\belowdisplayskip \abovedisplayskip
\def\@listi{\leftmargin\leftmargini
% \topsep 6\p@ \@plus2\p@ \@minus2\p@
\topsep 2.5\p@ \@plus2\p@ \@minus2\p@
% \parsep 3\p@ \@plus2\p@ \@minus\p@
\parsep 1.25\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
% \let\@listi\@listI}
\normalsize
\renewcommand\small{%
\@setfontsize\small{18.1\KIT@pt}{21.6\KIT@pt}%
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 6\p@ \@plus2\p@ \@minus2\p@
% \parsep 3\p@ \@plus2\p@ \@minus\p@
\parsep 2.0\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\footnotesize{%
\@setfontsize\footnotesize{16.5\KIT@pt}{20\KIT@pt}%
\abovedisplayskip 8\p@ \@plus2\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus\p@
\belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 4\p@ \@plus2\p@ \@minus2\p@
% \parsep 2\p@ \@plus\p@ \@minus\p@
\parsep 1.5\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\scriptsize{\@setfontsize\scriptsize{13,8\KIT@pt}{17\KIT@pt}}
\renewcommand\tiny{\@setfontsize\tiny{9.6\KIT@pt}{12.5\KIT@pt}}
\renewcommand\large{\@setfontsize\large{22.34\KIT@pt}{26\KIT@pt}}
\renewcommand\Large{\@setfontsize\Large{24.6\KIT@pt}{28.5\KIT@pt}}
\renewcommand\LARGE{\@setfontsize\LARGE{29.4\KIT@pt}{33.5\KIT@pt}}
\renewcommand\huge{\@setfontsize\huge{35.3\KIT@pt}{39.5\KIT@pt}}
\renewcommand\Huge{\@setfontsize\Huge{42.3\KIT@pt}{46.5\KIT@pt}}
\endinput
%%
%% End of file `KIT20.clo'.
Folien/KITbeamer/tex/latex/KIT/KIT22.clo 0 → 100644
%%
%% This is file `KIT22.clo',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `22pt')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesFile{KIT22.clo}
[\RCSRawDate\space v\RCSRevision\space Size option for KIT beamer slides]
\renewcommand\normalsize{%
\@setfontsize\normalsize{22.3\KIT@pt}{26\KIT@pt}%
\abovedisplayskip 12\p@ \@plus3\p@ \@minus7\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\belowdisplayskip \abovedisplayskip
\let\@listi\@listI}
\normalsize
\renewcommand\small{%
\@setfontsize\small{20.4\KIT@pt}{24.1\KIT@pt}%
\abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 9\p@ \@plus3\p@ \@minus5\p@
\parsep 4.5\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\footnotesize{%
\@setfontsize\footnotesize{18.1\KIT@pt}{21.6\KIT@pt}%
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 6\p@ \@plus2\p@ \@minus2\p@
\parsep 3\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\scriptsize{\@setfontsize\scriptsize{15.1\KIT@pt}{18\KIT@pt}}
\renewcommand\tiny{\@setfontsize\tiny{10.5\KIT@pt}{12\KIT@pt}}
\renewcommand\large{\@setfontsize\large{24.5\KIT@pt}{28.5\KIT@pt}}
\renewcommand\Large{\@setfontsize\Large{26.8\KIT@pt}{30.5\KIT@pt}}
\renewcommand\LARGE{\@setfontsize\LARGE{32.2\KIT@pt}{36\KIT@pt}}
\renewcommand\huge{\@setfontsize\huge{38.6\KIT@pt}{42.5\KIT@pt}}
\renewcommand\Huge{\@setfontsize\huge{46.3\KIT@pt}{50\KIT@pt}}
\endinput
%%
%% End of file `KIT22.clo'.
Folien/KITbeamer/tex/latex/KIT/KIT24.clo 0 → 100644
%%
%% This is file `KIT24.clo',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `24pt')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesFile{KIT24.clo}
[\RCSRawDate\space v\RCSRevision\space Size option for KIT beamer slides]
\renewcommand\normalsize{%
\@setfontsize\normalsize{24.5\KIT@pt}{28.5\KIT@pt}%
\abovedisplayskip 12\p@ \@plus3\p@ \@minus7\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\belowdisplayskip \abovedisplayskip
\let\@listi\@listI}
\normalsize
\renewcommand\small{%
\@setfontsize\small{22.3\KIT@pt}{26\KIT@pt}%
\abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 9\p@ \@plus3\p@ \@minus5\p@
\parsep 4.5\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\footnotesize{%
\@setfontsize\footnotesize{20.4\KIT@pt}{24.1\KIT@pt}%
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 6\p@ \@plus2\p@ \@minus2\p@
\parsep 3\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
\belowdisplayskip \abovedisplayskip
}
\renewcommand\scriptsize{\@setfontsize\scriptsize{17\KIT@pt}{20\KIT@pt}}
\renewcommand\tiny{\@setfontsize\tiny{12\KIT@pt}{14.5\KIT@pt}}
\renewcommand\large{\@setfontsize\large{26.8\KIT@pt}{30.5\KIT@pt}}
\renewcommand\Large{\@setfontsize\Large{29.4\KIT@pt}{33.5\KIT@pt}}
\renewcommand\LARGE{\@setfontsize\LARGE{35.2\KIT@pt}{39.5\KIT@pt}}
\renewcommand\huge{\@setfontsize\huge{42.3\KIT@pt}{46.5\KIT@pt}}
\renewcommand\Huge{\@setfontsize\huge{50.6\KIT@pt}{54.8\KIT@pt}}
\endinput
%%
%% End of file `KIT24.clo'.
Folien/KITbeamer/tex/latex/KIT/beamercolorthemeKIT.sty 0 → 100644
%%
%% This is file `beamercolorthemeKIT.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `color')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesPackage{beamercolorthemeKIT}
[\RCSRawDate\space v\RCSRevision\space Color definitions of the beamer theme KIT]
\mode<presentation>
\RequirePackage{KITcolors}
\colorlet{enum.fg}{white}
\colorlet{enum.bg}{KITgreen}
\colorlet{subenum.fg}{KITblack}
\colorlet{subenum.bg}{KITgreen50}
\colorlet{subsubenum.fg}{white}
\colorlet{subsubenum.bg}{KITblue}
\colorlet{subsubsubenum.fg}{KITblack}
\colorlet{subsubsubenum.bg}{KITblue50}
\colorlet{subsubsubsubenum.fg}{white}
\colorlet{subsubsubsubenum.bg}{KITblack}
\colorlet{subsubsubsubsubenum.fg}{white}
\colorlet{subsubsubsubsubenum.bg}{KITblack50}
\setbeamercolor{normal text}{fg=KITblack,bg=white}
\setbeamercolor{example text}{fg=KITblue}
\setbeamercolor{structure}{fg=KITblack50}
\setbeamercolor{palette secondary}{use=structure,fg=structure.fg!75!KITblack}
\setbeamercolor{palette tertiary}{use=structure,fg=structure.fg!50!KITblack}
\setbeamercolor{palette quaternary}{fg=KITblack}
\setbeamercolor{frametitle}{parent=palette quaternary}
\setbeamercolor{navigation symbols}{use=structure,fg=structure.fg}
\setbeamercolor{navigation symbols dimmed}{use=structure,fg=KITblack15}
\setbeamercolor{subsubsubitem}{parent=subsubitem}
\setbeamercolor{subsubsubsubitem}{parent=subsubsubitem}
\setbeamercolor{subsubsubsubsubitem}{parent=subsubsubsubitem}
\setbeamercolor{item projected}{parent=item,use=item,fg=enum.fg,bg=enum.bg}
\setbeamercolor{subitem projected}{parent=item projected,fg=subenum.fg,bg=subenum.bg}
\setbeamercolor{subsubitem projected}{parent=subitem projected,fg=subsubenum.fg,bg=subsubenum.bg}
\setbeamercolor{subsubsubitem projected}{parent=subsubitem projected,fg=subsubsubenum.fg,bg=subsubsubenum.bg}
\setbeamercolor{subsubsubsubitem projected}{parent=subsubsubitem projected,fg=subsubsubsubenum.fg,bg=subsubsubsubenum.bg}
\setbeamercolor{subsubsubsubsubitem projected}{parent=subsubsubsubitem projected,fg=subsubsubsubsubenum.fg,bg=subsubsubsubsubenum.bg}
\setbeamercolor{enumerate subsubsubitem}{parent=subsubsubitem}
\setbeamercolor{enumerate subsubsubsubitem}{parent=subsubsubsubitem}
\setbeamercolor{enumerate subsubsubsubsubitem}{parent=subsubsubsubsubitem}
\setbeamercolor{itemize subsubsubitem}{parent=subsubsubitem}
\setbeamercolor{itemize subsubsubsubitem}{parent=subsubsubsubitem}
\setbeamercolor{itemize subsubsubsubsubitem}{parent=subsubsubsubsubitem}
\setbeamercolor{itemize/enumerate subsubsubbody}{}
\setbeamercolor{itemize/enumerate subsubsubsubbody}{}
\setbeamercolor{itemize/enumerate subsubsubsubsubbody}{}
\mode
<all>
\endinput
%%
%% End of file `beamercolorthemeKIT.sty'.
Folien/KITbeamer/tex/latex/KIT/beamerfontthemeKIT.sty 0 → 100644
%%
%% This is file `beamerfontthemeKIT.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `font')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesPackage{beamerfontthemeKIT}
[\RCSRawDate\space v\RCSRevision\space Font definitions of the beamer theme KIT]
\mode<presentation>
\newcommand\scriptscriptsize{\@setfontsize\scriptscriptsize{\@viipt}{8.3pt}}
\newcommand\Micro{\@setfontsize\Micro{3.5pt}{4.2pt}}
\newcommand{\KIT@fnt@eightpt}{\fontsize{8\KIT@pt}{10\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@sevenpt}{\fontsize{7\KIT@pt}{9\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@twelvept}{\fontsize{12\KIT@pt}{14\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@titl}{\fontsize{26\KIT@pt}{29\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@tits}{\fontsize{22\KIT@pt}{24\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@subtit}{\fontsize{18\KIT@pt}{22\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@framtitl}{\fontsize{24\KIT@pt}{28\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@framtits}{\fontsize{20\KIT@pt}{24\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@framsubtit}{\fontsize{20\KIT@pt}{24\KIT@pt}\mdseries}
\newcommand{\KIT@fnt@hdr}{\fontsize{20\KIT@pt}{22\KIT@pt}\bfseries}
\newcommand{\KIT@fnt@txt}{\fontsize{20\KIT@pt}{24\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@inst}{\fontsize{10\KIT@pt}{12\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@KITtext}{\fontsize{4.94213\KIT@pt}{6\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@foot}{\fontsize{8\KIT@pt}{10\KIT@pt}\selectfont}
\newcommand{\KIT@fnt@page}{\fontsize{9\KIT@pt}{11\KIT@pt}\bfseries}
\setbeamerfont{title}{size=\Large,shape=\itshape,family=\sffamily,parent=structure}
\setbeamerfont{subsubsubitem}{parent=subsubitem}
\setbeamerfont{subsubsubsubitem}{parent=subsubsubitem}
\setbeamerfont{subsubsubsubsubitem}{parent=subsubsubsubitem}
\setbeamerfont{item projected}{size=\tiny,parent={item,projected text},series=\bfseries}
\setbeamerfont{subitem projected}{parent=item projected,series=\bfseries}
\setbeamerfont{subsubitem projected}{parent=subitem projected,series=\bfseries}
\setbeamerfont{subsubsubitem projected}{parent=subsubitem projected,series=\bfseries}
\setbeamerfont{subsubsubsubitem projected}{parent=subsubsubitem projected,series=\bfseries}
\setbeamerfont{subsubsubsubsubitem projected}{parent=subsubsubsubitem projected,series=\bfseries}
\setbeamerfont{itemize subsubsubitem}{parent=subsubsubitem}
\setbeamerfont{itemize subsubsubsubitem}{parent=subsubsubsubitem}
\setbeamerfont{itemize subsubsubsubsubitem}{parent=subsubsubsubsubitem}
\setbeamerfont{enumerate subsubsubitem}{parent=subsubsubitem}
\setbeamerfont{enumerate subsubsubsubitem}{parent=subsubsubsubitem}
\setbeamerfont{enumerate subsubsubsubsubitem}{parent=subsubsubsubsubitem}
\setbeamerfont{itemize/enumerate body}{size=\normalsize,series=\mdseries}
\setbeamerfont{itemize/enumerate subbody}{size=\small,series=\mdseries}
\setbeamerfont{itemize/enumerate subsubbody}{size=\footnotesize,series=\mdseries}
\setbeamerfont{itemize/enumerate subsubsubbody}{size=\scriptsize,series=\mdseries}
\setbeamerfont{itemize/enumerate subsubsubsubbody}{size=\scriptscriptsize,series=\mdseries}
\setbeamerfont{itemize/enumerate subsubsubsubsubbody}{size=\scriptscriptsize,series=\mdseries}
\mode
<all>
\endinput
%%
%% End of file `beamerfontthemeKIT.sty'.
Folien/KITbeamer/tex/latex/KIT/beamerinnerthemeKIT.sty 0 → 100644
%%
%% This is file `beamerinnerthemeKIT.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `inner,gridinner')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesPackage{beamerinnerthemeKIT}
[\RCSRawDate\space v\RCSRevision\space Inner part of the beamer theme KIT]
\mode<presentation>
\newlength{\KIT@tmplen}
\newcommand{\KIT@GetHt}[6][194\KIT@mm]{%
\sbox{\KIT@sbx}{\parbox{#1}{\raggedright#5#6}}%
\setlength{\KIT@tmplen}{\ht\KIT@sbx}%
\ifdim\KIT@tmplen>#2\addtolength{\KIT@tmplen}{#3}%
\else\setlength{\KIT@tmplen}{#4}\fi}
\let\KIT@frametitle@org=\frametitle
\def\frametitle{\@ifnextchar<\KIT@fr@titB\KIT@fr@titA}
\def\KIT@fr@titA{\@ifnextchar[\KIT@fr@titAB\KIT@fr@titAA}
\def\KIT@fr@titAA#1{%
\KIT@GetHt{8\KIT@mm}{0\KIT@mm}{0\KIT@mm}{\KIT@fnt@framtitl}{#1}%
\vspace*{\KIT@tmplen}\KIT@frametitle@org{#1}}
\def\KIT@fr@titAB[#1]#2{%
\KIT@GetHt{8\KIT@mm}{0\KIT@mm}{0\KIT@mm}{\KIT@fnt@framtitl}{#2}%
\vspace*{\KIT@tmplen}\KIT@frametitle@org[#1]{#2}}
\def\KIT@fr@titB<#1>{\@ifnextchar[{\KIT@fr@titBB<#1>}{\KIT@fr@titBA<#1>}}
\def\KIT@fr@titBA<#1>#2{%
\KIT@GetHt{8\KIT@mm}{0\KIT@mm}{0\KIT@mm}{\KIT@fnt@framtitl}{#2}%
\vspace*{\KIT@tmplen}\KIT@frametitle@org<#1>{#2}}
\def\KIT@fr@titBB<#1>[#2]#3{%
\KIT@GetHt{8\KIT@mm}{0\KIT@mm}{0\KIT@mm}{\KIT@fnt@framtitl}{#3}%
\vspace*{\KIT@tmplen}\KIT@frametitle@org<#1>[#2]{#3}}
\let\KIT@framesubtitle@org=\framesubtitle
\def\framesubtitle{\@ifnextchar<\KIT@fr@stitB\KIT@fr@stitA}
\def\KIT@fr@stitA#1{%
\KIT@GetHt{6.5\KIT@mm}{8.5\KIT@mm}{10\KIT@mm}{\KIT@fnt@framsubtit}{#1}%
\vspace*{\KIT@tmplen}\KIT@framesubtitle@org{#1}}
\def\KIT@fr@stitB<#1>#2{%
\KIT@GetHt{6.5\KIT@mm}{8.5\KIT@mm}{10\KIT@mm}{\KIT@fnt@framsubtit}{#2}%
\vspace*{\KIT@tmplen}\KIT@framesubtitle@org{#1}}
\newcommand{\max@itemdepth}{6}
\newcommand{\max@enumdepth}{6}
\renewcommand{\itemize}[1][]{%
\beamer@ifempty{#1}{}{\def\beamer@defaultospec{#1}}%
\ifnum \@itemdepth >\max@itemdepth\relax\@toodeep\else
\advance\@itemdepth\@ne
\beamer@computepref\@itemdepth% sets \beameritemnestingprefix
\usebeamerfont{itemize/enumerate \beameritemnestingprefix body}%
\usebeamercolor[fg]{itemize/enumerate \beameritemnestingprefix body}%
\usebeamertemplate{itemize/enumerate \beameritemnestingprefix body begin}%
\list
{\usebeamertemplate{itemize \beameritemnestingprefix item}}
{\def\makelabel##1{%
{%
\hss\llap{{%
\usebeamerfont*{itemize \beameritemnestingprefix item}%
\usebeamercolor[fg]{itemize \beameritemnestingprefix item}##1}}%
}%
}%
\expandafter\setlength{\labelsep}%
{\csname labelsep@item\romannumeral\the\@itemdepth\endcsname}
\expandafter\setlength{\itemindent}%
{\csname item@indent\romannumeral\the\@itemdepth\endcsname}
}
\fi%
\beamer@cramped%
\raggedright%
\beamer@firstlineitemizeunskip%
}
\defbeamertemplateparent{itemize items}[KIT]{itemize item,itemize subitem,itemize subsubitem,subsubsubitem,subsubsubsubitem,subsubsubsubsubitem}
{}
\setbeamertemplate{items}[KIT]
\setbeamertemplate{itemize item}{\KIT@mark}
\setbeamertemplate{itemize subitem}{\KIT@mark}
\setbeamertemplate{itemize subsubitem}{\KIT@mark}
\setbeamertemplate{itemize subsubsubitem}{\KIT@mark}
\setbeamertemplate{itemize subsubsubsubitem}{\KIT@mark}
\setbeamertemplate{itemize subsubsubsubsubitem}{\KIT@mark}
\defbeamertemplatealias{itemize subsubsubitem}{triangle}{default}
\defbeamertemplatealias{itemize subsubsubsubitem}{triangle}{default}
\defbeamertemplatealias{itemize subsubsubsubsubitem}{triangle}{default}
\defbeamertemplate{itemize subsubsubitem}{circle}{\tiny\raise0.5pt\hbox{\textbullet}}
\defbeamertemplate{itemize subsubsubsubitem}{circle}{\tiny\raise0.5pt\hbox{\textbullet}}
\defbeamertemplate{itemize subsubsubsubsubitem}{circle}{\tiny\raise0.5pt\hbox{\textbullet}}
\defbeamertemplate{itemize subsubsubitem}{square}{\footnotesize\hbox{\vrule width 1ex height 1ex}}
\defbeamertemplate{itemize subsubsubsubitem}{square}{\footnotesize\hbox{\vrule width 1ex height 1ex}}
\defbeamertemplate{itemize subsubsubsubsubitem}{square}{\footnotesize\hbox{\vrule width 1ex height 1ex}}
\defbeamertemplate{itemize subsubsubitem}{ball}{\raise0.2pt\beamer@usesphere{subsubsubitem projected}{smallsphere}}
\defbeamertemplate{itemize subsubsubsubitem}{ball}{\raise0.2pt\beamer@usesphere{subsubsubsubitem projected}{smallsphere}}
\defbeamertemplate{itemize subsubsubsubsubitem}{ball}{\raise0.2pt\beamer@usesphere{subsubsubsubsubitem projected}{smallsphere}}
\def\usesubsubsubitemizeitemtemplate{\setbeamertemplate{itemize subsubsubitem}}
\def\usesubsubsubsubitemizeitemtemplate{\setbeamertemplate{itemize subsubsubsubitem}}
\def\usesubsubsubsubsubitemizeitemtemplate{\setbeamertemplate{itemize subsubsubsubsubitem}}
\defbeamertemplate*{itemize/enumerate subsubsubbody begin}{default}{}
\defbeamertemplate*{itemize/enumerate subsubsubbody end}{default}{}
\defbeamertemplate*{itemize/enumerate subsubsubsubbody begin}{default}{}
\defbeamertemplate*{itemize/enumerate subsubsubsubbody end}{default}{}
\defbeamertemplate*{itemize/enumerate subsubsubsubsubbody begin}{default}{}
\defbeamertemplate*{itemize/enumerate subsubsubsubsubbody end}{default}{}
\newcounter{enumv}
\newcounter{enumvi}
\renewcommand{\theenumiv}{\arabic{enumiv}}
\renewcommand{\theenumv}{\arabic{enumv}}
\renewcommand{\theenumvi}{\arabic{enumvi}}
\newcommand{\insertsubsubsubenumlabel}{\theenumiv}
\newcommand{\insertsubsubsubsubenumlabel}{\theenumv}
\newcommand{\insertsubsubsubsubsubenumlabel}{\theenumvi}
\def\enumerate{%
\ifnum\@enumdepth>\max@enumdepth\relax\@toodeep
\else%
\advance\@enumdepth\@ne%
\edef\@enumctr{enum\romannumeral\the\@enumdepth}%
\advance\@itemdepth\@ne%
\fi%
\beamer@computepref\@enumdepth% sets \beameritemnestingprefix
\edef\beamer@enumtempl{enumerate \beameritemnestingprefix item}%
\@ifnextchar[{\beamer@@enum@}{\beamer@enum@}}
\def\beamer@enum@{%
\beamer@computepref\@itemdepth% sets \beameritemnestingprefix
\usebeamerfont{itemize/enumerate \beameritemnestingprefix body}%
\usebeamercolor[fg]{itemize/enumerate \beameritemnestingprefix body}%
\usebeamertemplate{itemize/enumerate \beameritemnestingprefix body begin}%
\expandafter
\list
{\usebeamertemplate{\beamer@enumtempl}}
{\usecounter\@enumctr%
\def\makelabel##1{{\hss\llap{{%
\usebeamerfont*{enumerate \beameritemnestingprefix item}%
\usebeamercolor[fg]{enumerate \beameritemnestingprefix item}##1}}}}%
\expandafter\setlength{\labelsep}%
{\csname labelsep@enum\romannumeral\the\@itemdepth\endcsname}
\expandafter\setlength{\itemindent}%
{\csname enum@indent\romannumeral\the\@itemdepth\endcsname}
}%
\beamer@cramped%
\raggedright%
\beamer@firstlineitemizeunskip%
}
\def\beamer@computepref#1{%
\let\beameritemnestingprefix\@empty%
\ifcase#1\or\or\def\beameritemnestingprefix{sub}\or\def\beameritemnestingprefix{subsub}\or\def\beameritemnestingprefix{subsubsub}\or\def\beameritemnestingprefix{subsubsubsub}\or\def\beameritemnestingprefix{subsubsubsubsub}\or\@toodeep\fi%
}
\defbeamertemplateparent{enumerate items}[KIT]{enumerate item,enumerate subitem,enumerate subsubitem,enumerate subsubsubitem,enumerate subsubsubsubitem,enumerate mini}
{}
\defbeamertemplate*{enumerate subsubsubitem}{default}{\insertenumlabel.\insertsubenumlabel.\insertsubsubenumlabel.\insertsubsubsubenumlabel}
\defbeamertemplate*{enumerate subsubsubsubitem}{default}{\insertenumlabel.\insertsubenumlabel.\insertsubsubenumlabel.\insertsubsubsubenumlabel.\insertsubsubsubsubenumlabel}
\defbeamertemplate*{enumerate subsubsubsubsubitem}{default}{\insertenumlabel.\insertsubenumlabel.\insertsubsubenumlabel.\insertsubsubsubenumlabel.\insertsubsubsubsubenumlabel.\insertsubsubsubsubsubenumlabel}
\defbeamertemplate*{enumerate subsubsubitem}{ball}
{
\begin{pgfpicture}{-1ex}{-0.55ex}{1ex}{1ex}
\usebeamercolor[fg]{subsubsubitem projected}
{\pgftransformscale{1.4}\pgftext{\normalsize\pgfuseshading{bigsphere}}}
\pgftext{%
\usebeamerfont*{subsubitem projected}%
\insertsubsubsubenumlabel}
\end{pgfpicture}%
}
\defbeamertemplate*{enumerate subsubsubsubitem}{ball}
{
\begin{pgfpicture}{-1ex}{-0.55ex}{1ex}{1ex}
\usebeamercolor[fg]{subsubsubsubitem projected}
{\pgftransformscale{1.4}\pgftext{\normalsize\pgfuseshading{bigsphere}}}
\pgftext{%
\usebeamerfont*{subsubsubitem projected}%
\insertsubsubsubsubenumlabel}
\end{pgfpicture}%
}
\defbeamertemplate*{enumerate subsubsubsubsubitem}{ball}
{
\begin{pgfpicture}{-1ex}{-0.55ex}{1ex}{1ex}
\usebeamercolor[fg]{subsubsubsubsubitem projected}
{\pgftransformscale{1.4}\pgftext{\normalsize\pgfuseshading{bigsphere}}}
\pgftext{%
\usebeamerfont*{subsubsubsubitem projected}%
\insertsubsubsubsubsubenumlabel}
\end{pgfpicture}%
}
\defbeamertemplate{section in toc}{KIT}
{\leavevmode\leftskip=1.75ex%
\llap{%
\usebeamerfont*{section number projected}%
\usebeamercolor[bg]{section number projected}%
\scalebox{1.2}{\protect\KIT@mark}
\hskip-2.25ex%
}
\kern2.25ex\inserttocsection\par}
\defbeamertemplate{subsection in toc}{KIT}
{\leavevmode\leftskip=5ex%
\llap{%
\usebeamercolor[bg]{subsection number projected}%
\KIT@mark
}
\kern.75ex\inserttocsubsection\par}
\defbeamertemplate{subsubsection in toc}{KIT}
{\leavevmode\normalsize%
\usebeamerfont{subsection in toc}
\leftskip=7ex
\usebeamerfont{subsubsection in toc}%
\llap{%
\usebeamercolor[bg]{subsubsection number projected}%
\KIT@mark
\kern1ex}%
\inserttocsubsubsection\par}
\setbeamertemplate{title page}{%
\ifbeamer@centered
\vspace*{-.351truemm}%
\else
\vspace*{-2.36675truemm}%
\fi
\vspace*{-23\KIT@mm}%
\begin{tikzpicture}
%%\useasboundingbox (7.6mm,0mm) rectangle (135.6mm,95.649mm);
% \useasboundingbox (7.6mm,-\headsep) rectangle (135.6mm,95.649mm-\headsep);
\useasboundingbox (5.584252mm,.015mm) rectangle (133.584252mm,96.015mm);
\fill[white] (0\KIT@mm,0\KIT@mm) rectangle (254\KIT@mm,93.0\KIT@mm);
\pgftext[at=\pgfpoint{3\KIT@mm}{15\KIT@mm},left,bottom]
{\usebox{\KIT@titimg}}
% Line above the title image:
\fill[white] (3\KIT@mm,89\KIT@mm) rectangle (251\KIT@mm,89.5\KIT@mm);
\fill[KITblack50] (3\KIT@mm,89.5\KIT@mm) rectangle (251\KIT@mm,101.5\KIT@mm);
\pgftext[at=\pgfpoint{11.0\KIT@mm}{95.5\KIT@mm},left]
{\textcolor{white}{\KIT@fnt@inst \insertinstitute}}
\fill[white] (0\KIT@mm,101.5\KIT@mm) rectangle (254\KIT@mm,190.5\KIT@mm);
\KIT@MFrame[\KIT@MFbadd]
\pgftext[at=\pgfpoint{11\KIT@mm}{180.5\KIT@mm},left,top]
{\pgfimage[interpolate=true,width=45\KIT@mm]{\KIT@logo}}
\pgftext[at=\pgfpoint{243\KIT@mm}{180.5\KIT@mm},right,top]{\KIT@ologo}
%% \pgftext[at=\pgfpoint{19.0\KIT@mm}{133\KIT@mm},left,base]
%% {\parbox[b]{226\KIT@mm}{%
%%% \raggedright\fontsize{32\KIT@pt}{36\KIT@pt}\bfseries\inserttitle}}
%% \raggedright\KIT@fnt@titl\inserttitle}}
%% \KIT@tlenA=\dp\KIT@sbx%
%% \addtolength{\KIT@tlen}{\KIT@tlenA}%
%% \settoheight{\KIT@tlenA}{\KIT@fnt@titl\inserttitle}%
%% \ifdim\KIT@tlen>30\KIT@pt
%% \pgftext[at=\pgfpoint{19.0\KIT@mm}{127\KIT@mm},left,top]
%% \raggedright\fontsize{16\KIT@pt}{18\KIT@pt}\selectfont\insertsubtitle}}
\pgftext[at=\pgfpoint{11.0\KIT@mm}{130\KIT@mm},left]
{\settoheight{\KIT@tlen}{\parbox{226\KIT@mm}{%
\raggedright\KIT@fnt@titl\KIT@title%
\global\KIT@tlenA=\baselineskip}}%
\parbox{226\KIT@mm}{\raggedright
\ifdim\KIT@tlen>\KIT@tlenA\KIT@fnt@tits\else\KIT@fnt@titl\fi
\KIT@title\\[6.1\KIT@mm]
\KIT@fnt@subtit\insertsubtitle
}}
\pgftext[at=\pgfpoint{11\KIT@mm}{5.6\KIT@mm},left,base]{%
\settowidth{\KIT@tlen}{{\KIT@fnt@foot nationales
Forschungszentrum in der Helmholtz-Gemeinschaft}}%
\parbox{\KIT@tlen}{\KIT@fnt@foot\raggedright\KIT@text}}
\pgftext[at=\pgfpoint{251\KIT@mm}{7.5\KIT@mm},right]
{{\fontsize{16\KIT@pt}{18\KIT@pt}\selectfont\bfseries\color{white}\KIT@Web}}
\ifKIT@grid
\draw[step=1\KIT@mm,style=help lines]
(0\KIT@mm,0\KIT@mm) grid (254\KIT@mm,190.5\KIT@mm);
\draw[step=10\KIT@mm,red,very thin]
(0\KIT@mm,0\KIT@mm) grid (254\KIT@mm,190.5\KIT@mm);
\draw[blue,thin]
(0\KIT@mm,0\KIT@mm) rectangle (254\KIT@mm,190.5\KIT@mm);
\fi
\end{tikzpicture}%
\ifKIT@titlepage@z\setcounter{framenumber}{0}\fi
}
\mode
<all>
\endinput
%%
%% End of file `beamerinnerthemeKIT.sty'.
Folien/KITbeamer/tex/latex/KIT/beamerouterthemeKIT.sty 0 → 100644
%%
%% This is file `beamerouterthemeKIT.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `outer,gridouter')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesPackage{beamerouterthemeKIT}
[\RCSRawDate\space v\RCSRevision\space Outer part of the beamer theme KIT]
\mode<presentation>
\setbeamertemplate{navigation symbols}{}
\newif\ifKIT@ins@warn
\KIT@ins@warntrue
%%\setbeamertemplate{frametitle}{\Large\insertframetitle\par}
%%\setbeamertemplate{frametitle}{\rule{0pt}{8.7mm}\insertframetitle\par}
\setbeamertemplate{frametitle}{\vspace*{\KIT@FHeadHt}}
\newlength{\KIT@FHeadHt}
\newlength{\KIT@footerwd}
\setlength{\KIT@footerwd}{206\KIT@mm}
\AtBeginDocument{%
\addtolength{\KIT@footerwd}{-\footersepwd}
\addtobeamertemplate{background}{}{%
\global\KIT@FHeadHt=0\KIT@mm
\begin{tikzpicture}
\useasboundingbox (-4.415748mm, 0.000mm) rectangle (123.584252mm,96.000mm);
%\useasboundingbox (0mm,0mm) rectangle (128mm,96mm);
\KIT@MFrame[\KIT@MFbadd]
\ifKIT@grid
\draw[step=1\KIT@mm,style=help lines]
(0\KIT@mm,0\KIT@mm) grid (254\KIT@mm,190.5\KIT@mm);
\draw[step=10\KIT@mm,red,very thin]
(0\KIT@mm,0\KIT@mm) grid (254\KIT@mm,190.5\KIT@mm);
\draw[blue,thin]
(0\KIT@mm,0\KIT@mm) rectangle (254\KIT@mm,190.5\KIT@mm);
%% \draw[blue,thick]
%% (0\KIT@mm,0\KIT@mm) -- (254\KIT@mm,0\KIT@mm) -- (254\KIT@mm,190\KIT@mm)
%% -- (0\KIT@mm,190\KIT@mm) -- cycle;
\fi
\pgftext[at=\pgfpoint{243\KIT@mm}{180.5\KIT@mm},right,top]
{\pgfimage[interpolate=true,width=30\KIT@mm]{\KIT@logo}}
%% \pgftext[at=\pgfpoint{15\KIT@mm}{172\KIT@mm},left,base]
%% {\fontsize{30\KIT@pt}{32\KIT@pt}\bfseries\insertframetitle}
\pgftext[at=\pgfpoint{11\KIT@mm}{172.5\KIT@mm},left,base]
%% \pgftext[at=\pgfpoint{15\KIT@mm}{154\KIT@mm},left,base]
%% {\fontsize{25\KIT@pt}{27\KIT@pt}\bfseries\insertframesubtitle}
{\parbox[t]{194\KIT@mm}{\raggedright%
\KIT@fnt@framtitl
\insertframetitle\rule{0pt}{0pt}\\[4\KIT@pt]
\KIT@fnt@framsubtit
\insertframesubtitle}}
%% \pgftext[at=\pgfpoint{9\KIT@mm}{8\KIT@mm},base]
%% {\KIT@fnt@twelvept\bfseries\insertframenumber}
\pgftext[at=\pgfpoint{6\KIT@mm}{9.75\KIT@mm},left,base]
{\KIT@fnt@page\vphantom{0}\insertframenumber}
%% {\fontsize{7\KIT@pt}{8.5\KIT@pt}\selectfont\vphantom{0}\insertdate}
\ifKIT@usefoot
\ifx\KIT@foot\relax
\pgftext[at=\pgfpoint{17\KIT@mm}{9.75\KIT@mm},left,base]
{\KIT@fnt@foot\vphantom{0}\KIT@date}
\pgftext[at=\pgfpoint{37\KIT@mm}{9.75\KIT@mm},left,base]
{\KIT@fnt@foot\vphantom{0}%
\ifdim\KIT@FtAFrac\KIT@footerwd>0pt
\addtolength{\KIT@footerwd}{-\KIT@FtSepFact\footersepwd}%
\parbox[t]{\KIT@FtAFrac\KIT@footerwd}{\raggedright%
\ifx\KIT@sauthor\relax\KIT@author
\else\KIT@sauthor\fi\KIT@FtATsep}%
\hspace{\KIT@FtSepFact\footersepwd}%
\parbox[t]{\KIT@FtTFrac\KIT@footerwd}{\raggedright%
\ifx\KIT@stitle\relax\KIT@title
\else\KIT@stitle\fi}%
\else
\parbox[t]{\KIT@FtTFrac\KIT@footerwd}{\raggedright%
\ifx\KIT@sauthor\relax\KIT@author
\else\KIT@sauthor\fi\KIT@FtATsep
\hspace{\KIT@FtSepFact\footersepwd}%
\ifx\KIT@stitle\relax\KIT@title
\else\KIT@stitle\fi}%
\fi}
\pgftext[at=\pgfpoint{243\KIT@mm}{9.75\KIT@mm},right,base]
{\KIT@fnt@foot\vphantom{0}%
\parbox[t]{\KIT@FtIFrac\KIT@footerwd}{\raggedleft%
\ifx\KIT@sinst\relax\KIT@inst
\else\KIT@sinst\fi}}
\else
\pgftext[at=\pgfpoint{17\KIT@mm}{9.75\KIT@mm},left,base]
{\KIT@fnt@foot\vphantom{0}\parbox[t]{226\KIT@mm}{\KIT@foot}}
\fi
\fi
\ifx\KIT@nav@syms\relax \relax
\else
\pgftext[at=\pgfpoint{251\KIT@mm}{15\KIT@mm},bottom,right]
{\color{KITblack50}%
\setbeamercolor*{navigation symbols}{fg=KITblack50}%
\setbeamercolor*{navigation symbols dimmed}{fg=KITblack30}%
\expandafter\KIT@ins@nav\KIT@nav@syms
}
\fi
\end{tikzpicture}%
}
\def\KIT@ins@nav#1{%
\if#1!\let\@next=\relax\else
\if#1s\hbox{\insertslidenavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\if#1f\hbox{\insertframenavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\if#1H\hbox{\insertsectionnavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\if#1h\hbox{\insertsubsectionnavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\if#1d\hbox{\insertdocnavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\if#1b\hbox{\insertbackfindforwardnavigationsymbol}%
\let\@next=\KIT@ins@nav\else
\ifKIT@ins@warn
\PackageWarning{beamerKIT}{Invalid navigation symbol key `#1' has been ignored}%
\message{To avoid the warning use only the keys^^J
\@spaces `s' to insert the slide navigation symbol^^J
\@spaces `f' to insert the frame navigation symbol^^J
\@spaces `H' to insert the section navigation symbol^^J
\@spaces `h' to insert the subsection navigation symbol^^J
\@spaces `d' to insert the doc navigation symbol and^^J
\@spaces `b' to insert the backward - find - forward symbols.^^J}%
\global\KIT@ins@warnfalse
\fi
\let\@next=\KIT@ins@nav
\fi\fi\fi\fi\fi\fi\fi
\@next
}
}
\mode
<all>
\endinput
%%
%% End of file `beamerouterthemeKIT.sty'.
Folien/KITbeamer/tex/latex/KIT/beamerthemeKIT.sty 0 → 100644
%%
%% This is file `beamerthemeKIT.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% KITbeamer.dtx (with options: `base,grid')
%%
%% This is a generated file.
%%
%%
%% Copyright (C) 2010, 2011, 2012 by Klaus Braune <klaus.braune@kit.edu>,
%% Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT)
%%
%%
%% This file may be distributed and/or modified under the conditions of
%% the LaTeX Project Public License, either version 1.2 of this license
%% or (at your option) any later version. The latest version of this
%% license is in:
%%
%% http://www.latex-project.org/lppl.txt
%%
%% and version 1.2 or later is part of all distributions of LaTeX version
%% 1999/12/01 or later.
%%
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\RequirePackage{rcs}
\RCS $Date: 2012/06/12 09:03:06 $
\RCS $Revision: 1.2 $
\ProvidesPackage{beamerthemeKIT}
[\RCSRawDate\space v\RCSRevision\space Base part of the beamer theme KIT]
\RequirePackage{mathpazo}
\RequirePackage{uarial}
\let\KIT@fam=\sfdefault
\RequirePackage{tikz}
\newif\ifKIT@grid
\KIT@gridfalse
\mode<presentation>
\RequirePackage{KITdefs}
\newlength{\KIT@mm}
\setlength{\KIT@mm}{0.003937007874015748031\paperwidth}
\newlength{\KIT@pt}
%%\setlength{\KIT@pt}{.5333333333333333333pt}
\setlength{\KIT@pt}{0.3514598035145980351\KIT@mm}
\newlength{\KIT@clen}
\addtolength{\oddsidemargin}{-2.4mm}
\addtolength{\oddsidemargin}{-4\KIT@mm}
\setlength{\textwidth}{232.0\KIT@mm}
\setlength{\headsep}{23\KIT@mm}
\setlength{\KIT@titimgwd}{248\KIT@mm}
\let\titleimagewd=\KIT@titimgwd
\newlength{\titleimageht}\setlength{\titleimageht}{74\KIT@mm}
\setlength{\KIT@Framewd}{3\KIT@mm}
\setlength{\KIT@RFramewd}{.5\KIT@mm}
\setlength{\KIT@Linewd}{.5\KIT@pt}
\setlength{\KIT@MFllx}{0\KIT@mm}
\setlength{\KIT@MFlly}{0\KIT@mm}
\setlength{\KIT@MFurx}{254\KIT@mm}
\setlength{\KIT@MFury}{190.5\KIT@mm}
\newcommand{\KIT@MFodd}{10\KIT@mm}
\newcommand{\KIT@MFHdh}{0\KIT@mm}
\newcommand{\KIT@MFbadd}{12\KIT@mm}
\setlength{\leftmargini}{13.93329pt}
\setlength{\leftmarginii}{16.06725pt}
\setlength{\leftmarginiii}{16.06725pt}
\setlength{\leftmarginiv}{6.40mm}
\setlength{\leftmarginv}{6.40mm}
\setlength{\leftmarginvi}{0.00mm}
\newlength{\labelsep@itemi}
\setlength{\labelsep@itemi}{6.89763pt}
\newlength{\labelsep@itemii}
\setlength{\labelsep@itemii}{5.475pt}
\newlength{\labelsep@itemiii}
\setlength{\labelsep@itemiii}{3.76784pt}
\newlength{\labelsep@itemiv}
\setlength{\labelsep@itemiv}{4.33688pt}
\let\labelsep@itemv=\labelsep@itemiv
\let\labelsep@itemvi=\labelsep@itemv
\newlength{\labelsep@enumi}
\setlength{\labelsep@enumi}{\labelsep@itemi}
\addtolength{\labelsep@enumi}{-2\KIT@mm}
\newlength{\labelsep@enumii}
\setlength{\labelsep@enumii}{\labelsep@itemii}
\addtolength{\labelsep@enumii}{-1.7\KIT@mm}
\newlength{\labelsep@enumiii}
\setlength{\labelsep@enumiii}{\labelsep@itemiii}
\addtolength{\labelsep@enumiii}{-1.4\KIT@mm}
\newlength{\labelsep@enumiv}
\setlength{\labelsep@enumiv}{\labelsep@itemiv}
\addtolength{\labelsep@enumiv}{-1.25\KIT@mm}
\let\labelsep@enumv=\labelsep@itemv
\let\labelsep@enumvi=\labelsep@itemvi
\newlength{\item@indenti}
\setlength{\item@indenti}{0pt}
\let\item@indentii=\item@indenti
\let\item@indentiii=\item@indenti
\let\item@indentiv=\item@indenti
\let\item@indentv=\item@indenti
\newlength{\item@indentvi}
\setlength{\item@indentvi}{-\labelsep@itemiv}
\let\enum@indenti=\item@indenti
\let\enum@indentii=\item@indentii
\let\enum@indentiii=\item@indentiii
\let\enum@indentiv=\item@indentiv
\let\enum@indentv=\item@indentv
\let\enum@indentvi=\item@indentvi
\newcommand{\heading}[1]{%
\vspace{4.9\KIT@pt}\par{\KIT@fnt@hdr#1}
}
\newif\ifKIT@De\KIT@Detrue
\DeclareOption{deutsch}{\AtEndOfPackage{\German}%
\def\KIT@babelopts{english,ngerman}}
\DeclareOption{german}{\AtEndOfPackage{\German}%
\def\KIT@babelopts{english,ngerman}}
\DeclareOption{ngerman}{\AtEndOfPackage{\German}%
\def\KIT@babelopts{english,ngerman}}
\DeclareOption{germanb}{\AtEndOfPackage{\German}%
\def\KIT@babelopts{english,ngerman}}
\DeclareOption{englisch}{\AtEndOfPackage{\English}%
\def\KIT@babelopts{ngerman,english}}
\DeclareOption{english}{\AtEndOfPackage{\English}%
\def\KIT@babelopts{ngerman,english}}
\DeclareOption{UKenglish}{\AtEndOfPackage{\English}%
\def\KIT@babelopts{ngerman,english}}
\DeclareOption{USenglish}{\AtEndOfPackage{\English}%
\def\KIT@babelopts{ngerman,english}}
\def\KIT@babelopts{english,ngerman}
\def\KIT@clrmod{rgb}
\DeclareOption{cmyk}{\def\KIT@clrmod{cmyk}}
\DeclareOption{rgb}{\def\KIT@clrmod{rgb}}
\DeclareOption{bw}{\AtBeginDocument{\BW}}
\DeclareOption{sw}{\AtBeginDocument{\BW}}
\DeclareOption{color}{\AtBeginDocument{\Color}}
\DeclareOption{farbig}{\AtBeginDocument{\Color}}
\DeclareOption{16pt}{\input{KIT16.clo}}
\DeclareOption{18pt}{\input{KIT18.clo}}
\DeclareOption{20pt}{\input{KIT20.clo}}
\DeclareOption{22pt}{\input{KIT22.clo}}
\DeclareOption{24pt}{\input{KIT24.clo}}
\newif\ifKIT@usefoot\KIT@usefoottrue
\DeclareOption{usefoot}{\KIT@usefoottrue}
\DeclareOption{nofoot}{\KIT@usefootfalse}
\newif\ifKIT@titlepage@z\KIT@titlepage@zfalse
\DeclareOption{titlepage0}{\KIT@titlepage@ztrue}
\DeclareOption{KITtoc}{\AtEndOfPackage{%
\setbeamertemplate{section in toc}[KIT]
\setbeamertemplate{subsection in toc}[KIT]
\setbeamertemplate{subsubsection in toc}[KIT]}}
\newlength{\tocsecskip}
\setlength{\tocsecskip}{\fill}
\newlength{\tochideskip}
\setlength{\tochideskip}{1.5em}
\def\beamer@sectionintoc#1#2#3#4#5{%
\ifnum\c@tocdepth>0%
\ifnum#4=\beamer@showpartnumber%
{
\beamer@saveanother%
\gdef\beamer@todo{}%
\beamer@slideinframe=#1\relax%
\expandafter\only\beamer@tocsections{\gdef\beamer@todo{%
\beamer@tempcount=#5\relax%
\advance\beamer@tempcount by\beamer@sectionadjust%
\edef\inserttocsectionnumber{\the\beamer@tempcount}%
\def\inserttocsection{\hyperlink{Navigation#3}{#2}}%
\beamer@tocifnothide{\ifnum\c@section=#1\beamer@toc@cs\else\beamer@toc@os\fi}%
{
\ifbeamer@pausesections\pause\fi%
\ifx\beamer@toc@ooss\beamer@hidetext
\vskip\tochideskip
\else
\vskip\tocsecskip
\fi
{%
\hbox{\vbox{%
\def\beamer@breakhere{\\}%
\beamer@tocact{\ifnum\c@section=#1\beamer@toc@cs\else\beamer@toc@os\fi}{section in toc}}}%
\par%
}%
}%
}
}%
\beamer@restoreanother%
}
\beamer@todo%
\fi\fi%
}
\DeclareOption{compacttoc}{\setlength{\tocsecskip}{1ex}}
\ExecuteOptions{20pt}
\ProcessOptions
\PassOptionsToPackage{\KIT@babelopts}{babel}
\PassOptionsToPackage{\KIT@clrmod}{KITcolors}
\RequirePackage{KITcolors}
\let\KIT@BW=\BW
\renewcommand{\BW}{\KIT@BW
\setbeamertemplate{itemize item}{\KIT@mark[black]}%
\setbeamertemplate{itemize subitem}{\KIT@mark[black]}%
\setbeamertemplate{itemize subsubitem}{\KIT@mark[black]}%
\setbeamertemplate{itemize subsubsubitem}{\KIT@mark[black]}%
\setbeamertemplate{itemize subsubsubsubitem}{\KIT@mark[black]}%
\setbeamertemplate{itemize subsubsubsubsubitem}{\KIT@mark[black]}%
}
\let\KIT@Color=\Color
\renewcommand{\Color}{\KIT@Color
\setbeamertemplate{itemize item}{\KIT@mark}%
\setbeamertemplate{itemize subitem}{\KIT@mark}%
\setbeamertemplate{itemize subsubitem}{\KIT@mark}%
\setbeamertemplate{itemize subsubsubitem}{\KIT@mark}%
\setbeamertemplate{itemize subsubsubsubitem}{\KIT@mark}%
\setbeamertemplate{itemize subsubsubsubsubitem}{\KIT@mark}%
}
\gdef\English{%
\KIT@English
\gdef\KIT@logo{\KIT@logo@clrE}
}
\English
\gdef\German{%
\KIT@German
\gdef\KIT@logo{\KIT@logo@clrD}
}
\let\Deutsch=\German
\let\KIT@ologo=\relax
\renewcommand{\logo}[1]{%
\settowidth{\KIT@clen}{#1}
\ifdim\KIT@clen>30\KIT@mm
\@warning{%
The additional logo has been rescaled since an additional logo must
not be wider than the KIT logo and must optically not be larger
than 2/3 of the KIT logo!}%
\def\KIT@ologo{\resizebox{30\KIT@mm}{!}{#1}}
\else
\def\KIT@ologo{#1}
\fi}
\def\KIT@inslogo@warn{%
The command \noexpand\insertlogo is not available with the beamer theme KIT}
\renewcommand{\insertlogo}{\ifx\KIT@inslogo@warn\relax\relax\else
\@warning{\KIT@inslogo@warn}\global\let\KIT@inslogo@warn=\relax\fi}
\defbeamertemplate{sidebar right}{KIT}{\relax}
\setbeamertemplate{sidebar right}{KIT}
\newlength{\KITlogowd}
\setlength{\KITlogowd}{30\KIT@mm}
\newlength{\KITlogoht}
\setlength{\KITlogoht}{9.33333\KIT@mm}
\newlength{\footersepwd}
\setlength{\footersepwd}{10pt}
\def\AuthorTitleSep#1{\gdef\KIT@FtATsep{#1}}
\gdef\KIT@FtATsep{~-~}
\AtBeginDocument{%
\ifx\KIT@FtATsep\relax
\gdef{\KIT@FtATsep}{\hspace{\KIT@FtSepFact\footersepwd}}\fi
\settowidth{\KIT@tmplen}{\KIT@FtATsep}
\addtolength{\KIT@footerwd}{-\KIT@tmplen}}
\def\AuthorTitleSpaceFactor#1{\gdef\KIT@FtSepFact{#1}}
\gdef\KIT@FtSepFact{0}
\let\KIT@org@author=\author
\let\KIT@author=\relax
\let\KIT@sauthor=\relax
\renewcommand{\author}[2][\relax]{%
\gdef\KIT@author{#2}
\ifx#1\relax
\KIT@org@author{#2}
\else
\gdef\KIT@sauthor{#1}
\KIT@org@author[{#1}]{#2}
\fi}
\def\FooterAuthorfraction#1{\gdef\KIT@FtAFrac{#1}}
\gdef\KIT@FtAFrac{0}
\let\KIT@org@title=\title
\let\KIT@title=\relax
\let\KIT@stitle=\relax
\renewcommand{\title}[2][\relax]{%
\gdef\KIT@title{#2}
\ifx#1\relax
\KIT@org@title{#2}
\else
\gdef\KIT@stitle{#1}
\KIT@org@title[{#1}]{#2}
\fi}
\def\FooterTitlefraction#1{\gdef\KIT@FtTFrac{#1}}
\gdef\KIT@FtTFrac{.7}
\let\KIT@org@institute=\institute
\let\KIT@inst=\relax
\let\KIT@sinst=\relax
\renewcommand{\institute}[2][\relax]{%
\gdef\KIT@inst{#2}
\ifx#1\relax
\KIT@org@institute{#2}
\else
\settoheight{\KIT@clen}{#1}
\settodepth{\KIT@tmplen}{#1}
\addtolength{\KIT@clen}{\KIT@tmplen}
\ifdim\KIT@clen>9.333333\KIT@mm
\@warning{%
The additional logo has been rescaled since an additional logo must
not be wider than the KIT logo and must optically not be larger
than 2/3 of the KIT logo!}%
\gdef\KIT@sinst{\resizebox{!}{9.33333\KIT@mm}{#1}}
\else
\gdef\KIT@sinst{#1}
\fi
\KIT@org@institute[{#1}]{#2}
\fi}
\def\FooterInstfraction#1{\gdef\KIT@FtIFrac{#1}}
\gdef\KIT@FtIFrac{.3}
\newcommand{\KITfoot}[1]{\KIT@usefoottrue\gdef\KIT@foot{#1}}
\let\KIT@foot=\relax
\newcommand{\usenavigationsymbols}[1][fHb]{\xdef\KIT@nav@syms{#1!}}
\let\KIT@nav@syms=\relax
\usefonttheme{KIT}
\usecolortheme{KIT}
\useinnertheme{KIT}
\useoutertheme{KIT}
\DateNumbers
\AtBeginDocument{\normalsize\raggedbottom}
\let\KIT@document=\document
\def\document{\KIT@document\addtolength{\textheight}{-4.8\baselineskip}}
\mode
<all>
\endinput
%%
%% End of file `beamerthemeKIT.sty'.
Folien/KITbeamerXmpl/KIT-Folien-de.nav 0 → 100644
\beamer@endinputifotherversion {3.33pt}
\headcommand {\slideentry {0}{0}{1}{1/1}{}{0}}
\headcommand {\beamer@framepages {1}{1}}
\headcommand {\slideentry {0}{0}{2}{2/2}{}{0}}
\headcommand {\beamer@framepages {2}{2}}
\headcommand {\slideentry {0}{0}{3}{3/3}{}{0}}
\headcommand {\beamer@framepages {3}{3}}
\headcommand {\slideentry {0}{0}{4}{4/4}{}{0}}
\headcommand {\beamer@framepages {4}{4}}
\headcommand {\slideentry {0}{0}{5}{5/5}{}{0}}
\headcommand {\beamer@framepages {5}{5}}
\headcommand {\slideentry {0}{0}{6}{6/6}{}{0}}
\headcommand {\beamer@framepages {6}{6}}
\headcommand {\slideentry {0}{0}{7}{7/7}{}{0}}
\headcommand {\beamer@framepages {7}{7}}
\headcommand {\slideentry {0}{0}{8}{8/8}{}{0}}
\headcommand {\beamer@framepages {8}{8}}
\headcommand {\slideentry {0}{0}{9}{9/9}{}{0}}
\headcommand {\beamer@framepages {9}{9}}
\headcommand {\beamer@partpages {1}{9}}
\headcommand {\beamer@subsectionpages {1}{9}}
\headcommand {\beamer@sectionpages {1}{9}}
\headcommand {\beamer@documentpages {9}}
\headcommand {\def \inserttotalframenumber {8}}
Folien/KITbeamerXmpl/KIT-Folien-de.tex 0 → 100644
\documentclass[t]{beamer}
%\documentclass{beamer}
\listfiles
\mode<presentation>
{
\usetheme[deutsch,titlepage0]{KIT}
% \usetheme[usefoot]{KIT}
% \usetheme{KIT}
%% \usefonttheme{structurebold}
\setbeamercovered{transparent}
%\setbeamertemplate{enumerate items}[circle]
\setbeamertemplate{enumerate items}[ball]
}
\usepackage{babel}
%\date{10.05.2010}
%\DateText
\newlength{\Ku}
\setlength{\Ku}{1.43375pt}
\usepackage[latin1]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{array}
\usepackage{multicol}
\usepackage{lipsum}
%\usenavigationsymbols
%\usenavigationsymbols[sfHhdb]
%\usenavigationsymbols[sfhHb]
\title[]{Gemeinsam an die Spitze}
%\subtitle{Karlsruhe Institute of Technology (KIT)}
\author[]{KIT}
\AuthorTitleSep{\relax}
\institute[]{KARLSRUHER INSTITUT FR TECHNOLOGIE (KIT)}
\TitleImage[width=\titleimagewd]{Bilder/KIT-Titel}
\newlength{\tmplen}
\newcommand{\verysmall}{\fontsize{6pt}{8.6pt}\selectfont}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Eine einzigartige Kooperation}
Karlsruher Institut fr Technologie (KIT):
\settowidth{\tmplen}{Forschungszentrum Karlsruhe GmbH}
\vspace{5mm}
\begin{columns}[onlytextwidth,b]
\column{\tmplen}
Die Kooperation von\\
Forschungszentrum Karlsruhe GmbH\\
und Universitt Karlsruhe (TH)\\
\mbox{}
\addtolength{\tmplen}{-\textwidth}
\setlength{\tmplen}{-\tmplen}
\column{.8\tmplen}
\hspace*{-.2\tmplen}\hfill\includegraphics[width=\tmplen]
{Bilder/KIT-Kooperation}
\end{columns}
\end{frame}
\begin{frame}
\frametitle{Zwei starke Partner}
\small
\renewcommand{\baselinestretch}{.95}\selectfont
\begin{minipage}{.625\linewidth}
\heading{Forschungszentrum Karlsruhe:}
\begin{itemize}
\item Programmorientierte Forschung auf hchstem internationalem Niveau
\item Eine der grten und erfolgreichsten Forschungseinrichtungen
in den Natur- und Ingenieurwissenschaften in Europa
\item Mitglied der Helmholtz-Gemeinschaft nationaler Forschungszentren
\end{itemize}
\heading{Universitt Karlsruhe (TH):}
\begin{itemize}
\item Gewinner der Excellence Initiative 2006 der Bundesrepublik
Deutschland und der Bundeslnder
\item Eine der in der Forschung bedeutendsten Universitten weltweit
\item Hchste Einwerbung von Drittmitteln von der DFG pro Kopf in
Deutschland
\end{itemize}
\end{minipage}
\hfill
\parbox{.325\linewidth}{\makebox[.325\textwidth][r]{
\includegraphics[width=.375\textwidth]
{Bilder/KIT-Promotion}}}
\end{frame}
\begin{frame}
\frametitle{Gemeinsames Ziel}
Positionierung als Institution international herausragender Forschung
und Lehre in den Natur-und Ingenieurwissenschaften mit wissenschaftlicher
Exzellenz und Weltspitzenniveau in:
\bigskip
\setlength{\tmplen}{.2875\linewidth}
\begin{columns}[onlytextwidth]
\begin{column}{\tmplen}
\includegraphics[width=\tmplen]
{Bilder/KIT-Research}
\begin{itemize}\item Forschung\end{itemize}
\end{column}
\begin{column}{\tmplen}
\includegraphics[width=\tmplen]
{Bilder/KIT-Teaching}
\begin{itemize}\item Lehre\end{itemize}
\end{column}
\begin{column}{\tmplen}
\includegraphics[width=\tmplen]
{Bilder/KIT-Innovation}
\begin{itemize}\item Innovation\end{itemize}
\end{column}
\end{columns}
\bigskip
\small
Voraussetzung:\\
ausgezeichnete Infrastruktur und hervorragende Dienstleistungseinheiten.
\end{frame}
\begin{frame}
\frametitle{Forschungsportfolio}
\parbox{.64\textwidth}{\raggedright
Exzellente Forschung basiert in erster Linie auf den Fhigkeiten und
Kenntnissen der wissenschaftlichen Mitarbeiter.
\bigskip
In KIT ordnen sich die Wissenschaftler entsprechend ihrem Fachwissen
Kompetenzfeldern zu, die thematisch zu Kompetenzbereichen gebndelt sind.
\bigskip
Kompetenzfelder und Kompetenzbereiche bilden das Kompetenzportfolio
des KIT, das auch neue wissenschaftliche Fragestellungen aufgreift
und sich so dynamisch weiterentwickelt.}
\hfill
\parbox{.312\textwidth}{%
\includegraphics[width=.312\textwidth]
{Bilder/KIT-Labor1}\\
\includegraphics[width=.133\textwidth]
{Bilder/KIT-Labor2}
\hfill
\includegraphics[width=.176\textwidth]
{Bilder/KIT-Labor3}}
\end{frame}
\begin{frame}
\frametitle{Kompetenzportfolio}
\framesubtitle{\normalsize\mdseries 30 Kompetenzfelder gebndelt in 6 Kompetenzbereiche}
\renewcommand{\baselinestretch}{.8}\verysmall
\begin{tikzpicture}
% Materie und Materialien
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,135\Ku) rectangle
(76\Ku,126\Ku)
(38\Ku,130.5\Ku) node {\color{black}Materie und Materialien};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,126\Ku) rectangle
(76\Ku,87\Ku);
\pgftext[at=\pgfpoint{0\Ku}{124.6\Ku},top,left]{%
\parbox{74\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Elementarteilchen- und Astroteilchenphysik
\item Kondensierte Materie
\item Nanowissenschaft
\item Mikrotechnologie
\item Optik und Photonik
\item Angewandte und neue Materialien
\end{itemize}}}
% Erde und Umwelt
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(79\Ku,135\Ku) rectangle
(155\Ku,126\Ku)
(119\Ku,130.5\Ku) node {\color{black}Erde und Umwelt};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(79\Ku,126\Ku) rectangle
(155\Ku,87\Ku);
\pgftext[at=\pgfpoint{79\Ku}{128.5\Ku},top,left]{%
\parbox{74\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Atmosphren und Klima
\item Geosphre und Risikomanagement
\item Hydrosphre und Umwelttechnologie
\item Bauwerke und urbane Infrastruktur
\end{itemize}}}
% Angewandte Lebenswissenschaften
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(158\Ku,135\Ku) rectangle
(230\Ku,126\Ku)
(194\Ku,130.5\Ku) node {\color{black}Angewandte Lebenswissenschaften};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(158\Ku,126\Ku) rectangle
(230\Ku,87\Ku);
\pgftext[at=\pgfpoint{158\Ku}{128.5\Ku},top,left]{%
\parbox{74\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Biotechnologie
\item Toxikologie und Ernhrungswissenschaft
\item Gesundheit und Medizintechnik
\item Zell- und Strukturbiologie
\end{itemize}}}
% Systeme undProzesse
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,84\Ku) rectangle
(230\Ku,75\Ku)
(115\Ku,79.5\Ku) node {\color{black}Systeme undProzesse};
% links:
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,75\Ku) rectangle
(115\Ku,51\Ku);
\pgftext[at=\pgfpoint{4\Ku}{77.0\Ku},top,left]{%
\parbox{107\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Strmungs-und Partikeldynamik
\item Chemische und Thermische Verfahrenstechnik
\item Brennstoffe und Verbrennung
\end{itemize}}}
% rechts:
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(115\Ku,75\Ku) rectangle
(230\Ku,51\Ku);
\pgftext[at=\pgfpoint{119\Ku}{77.0\Ku},top,left]{%
\parbox{107\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Systeme und eingebettete Systeme
\item Kraftwerkstechnik
\item Produktlebenszyklus
\item Mobile Systeme und Mobilitt
\end{itemize}}}
% Information, Kommunikation und Organisation
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,48\Ku) rectangle
(111\Ku,39\Ku)
(55.5\Ku,43.5\Ku) node {\color{black}Information, Kommunikation
und Organisation};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,39\Ku) rectangle
(111\Ku,4\Ku);
\pgftext[at=\pgfpoint{2\Ku}{41.0\Ku},top,left]{%
\parbox{109\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Algorithmen, Software und Informatiksysteme
\item Kognitive Systeme und Informationsverarbeitung
\item Kommunikationstechnik
\item Hochleistungsrechnen und Verteilte Systeme
\item Mathematische Modelle
\item Organisations-und Dienstleistungsgestaltung
\end{itemize}}}
% Technik, Kultur und Gesellschaft
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(119\Ku,48\Ku) rectangle
(230\Ku,39\Ku)
(174.5\Ku,43.5\Ku) node {\color{black}Technik, Kultur und Gesellschaft};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(119\Ku,39\Ku) rectangle
(230\Ku,4\Ku);
\pgftext[at=\pgfpoint{121\Ku}{41.0\Ku},top,left]{%
\parbox{109\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Kulturerbe und sozialer Wandel
\item Wirtschaftsorganisation und Innovation
\item Wechselwirkung von Wissenschaft, Technik und Gesellschaft
\end{itemize}}}
\end{tikzpicture}
\renewcommand{\baselinestretch}{1}\selectfont
\end{frame}
\begin{frame}
\frametitle{Zentren und Schwerpunkte}
\framesubtitle{\mdseries Thematische Orientierung, strategische
Forschungsplanung}
\parbox{.65\textwidth}{%
KIT-Zentren:
\begin{itemize}
\item Energie
\item NanoMikro
\item Elementarteilchen-und Astroteilchenphysik
\item Klima und Umwelt
\end{itemize}
\bigskip
KIT-Schwerpunkte:
\begin{itemize}
\item COMMputation
\item Mobilittssysteme
\item Optik und Photonik
\item Mensch und Technik
\item Neue und angewandte Materialien
\end{itemize}}
\hfill
\parbox{.3\textwidth}{%
\includegraphics[width=.3\textwidth]
{Bilder/KIT-Zentren}\\
\parbox{.135\textwidth}{%
\includegraphics[width=.14\textwidth]
{Bilder/KIT-Schwerpunkt1}}%
\hfill
\parbox{.149\textwidth}{%
\hspace*{-.005\textwidth}%
\includegraphics[width=.154\textwidth]
{Bilder/KIT-Schwerpunkt2}\\
\hspace*{-.005\textwidth}%
\includegraphics[width=.154\textwidth]
{Bilder/KIT-Schwerpunkt3}
\vspace*{.055\textwidth}}}
\end{frame}
\begin{frame}
\frametitle{KIT in Zahlen}
\vspace*{10\Ku}
\begin{tabular}[b]{r}
Mitarbeiter \\
\resizebox{68\Ku}{!}{\bfseries\color{KITgreen}8.000}
\end{tabular}
\hfill
\begin{tabular}[b]{r@{\hspace{-.2em}}l}
& Studierende \\
\resizebox{100\Ku}{!}{\bfseries\color{KITblack50}19.895}
\end{tabular}\\[-1\Ku]
\hfill
\raisebox{7\Ku}{%
\begin{tabular}{r}
\resizebox{52\Ku}{!}{\bfseries 350\phantom{0}} \\
Professoren
\end{tabular}}
\hspace{1\Ku}
\begin{tabular}{l}
\resizebox{72\Ku}{!}{\bfseries\color{KITgreen}650} \\
\hspace*{12.5\Ku}Millionen Euro Jahresbudget
\end{tabular}
\bigskip
\includegraphics[height=35\Ku]{Bilder/KIT-Liste1}
\hspace{1\Ku}
\includegraphics[height=35\Ku]{Bilder/KIT-Liste2}
\end{frame}
\begin{frame}
\frametitle{Karlsruher Institut fr Technologie}
\vspace*{10\Ku}
Danke fr Ihre Aufmerksamkeit.
\bigskip
\includegraphics[width=\textwidth]{Bilder/KIT-Finale-c}
\end{frame}
\end{document}
Folien/KITbeamerXmpl/KIT-Folien-en.tex 0 → 100644
\documentclass[t]{beamer}
%\documentclass[c]{beamer}
\listfiles
\mode<presentation>
{
\usetheme[english,titlepage0]{KIT}
% \usetheme[usefoot]{KIT}
% \usetheme{KIT}
%% \usefonttheme{structurebold}
\setbeamercovered{transparent}
%\setbeamertemplate{enumerate items}[circle]
\setbeamertemplate{enumerate items}[ball]
}
\usepackage{babel}
%\date{10.05.2010}
%\DateText
\newlength{\Ku}
\setlength{\Ku}{1.43375pt}
\usepackage[latin1]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{array}
\usepackage{multicol}
\usepackage{lipsum}
%\usenavigationsymbols
%\usenavigationsymbols[sfHhdb]
%\usenavigationsymbols[sfhHb]
\title[]{Together to the Top}
%\subtitle{Karlsruhe Institute of Technology (KIT)}
\author[]{KIT}
\AuthorTitleSep{\relax}
\institute[]{KARLSRUHE INSTITUTE OF TECHNOLOGY (KIT)}
%\institute[\raisebox{-4mm}{\includegraphics[height=5mm]{Bilder/OU-Logo}}]
% {KARLSRUHE INSTITUTE OF TECHNOLOGY (KIT)}
%\logo{\includegraphics[height=12mm]{Bilder/OU-Logo}}
\TitleImage[width=\titleimagewd]{Bilder/KIT-Titel}
\newlength{\tmplen}
\newcommand{\verysmall}{\fontsize{6pt}{8.6pt}\selectfont}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Unique Cooperation}
Karlsruhe Institute of Technology (KIT):
\settowidth{\tmplen}{Forschungszentrum Karlsruhe GmbH}
\addtolength{\tmplen}{-\textwidth}
\setlength{\tmplen}{-\tmplen}
\vspace{50mm}
The cooperation of\\
Forschungszentrum Karlsruhe GmbH\\
and Universitt Karlsruhe (TH)\\
\hfill
\parbox{\tmplen}{\vbox to 0pt{\vss\includegraphics[width=\tmplen]
{Bilder/KIT-Kooperation}}}
\end{frame}
\begin{frame}
\frametitle{Two Strong Partners}
\small
\renewcommand{\baselinestretch}{.95}\selectfont
\begin{minipage}{.625\linewidth}
\heading{Forschungszentrum Karlsruhe:}
\begin{itemize}
\item Programmatic research on highest international level
\item One of the largest and most successful science and engineering
research institutions in Europe
\item Member of the Helmholtz Association of National Research Centers
\end{itemize}
\heading{Universitt Karlsruhe (TH):}
\begin{itemize}
\item Winner of the Excellence Initiative 2006 launched by the Federal
Republic of Germany and the federal states
\item One of the universities strongest in research worldwide
\item Highest acquisition of DFG third-party funds per capita in Germany
\end{itemize}
\end{minipage}
\hfill
\parbox{.325\linewidth}{\makebox[.325\textwidth][r]{
\includegraphics[width=.375\textwidth]
{Bilder/KIT-Promotion}}}
\end{frame}
\begin{frame}
\frametitle{Common Objective}
Positioning as an institution of excellent research and lecturing in
natural and engineering sciences on an international scale,
with worldwide top scientific excellence in
\bigskip
%\bigskip
\parbox{.2875\linewidth}{%
\includegraphics[width=.2875\textwidth]
{Bilder/KIT-Research}
\begin{itemize}\item Research\end{itemize}}
\hfill
\parbox{.2875\linewidth}{%
\includegraphics[width=.2875\textwidth]
{Bilder/KIT-Teaching}
\begin{itemize}\item Teaching\end{itemize}}
\hfill
\parbox{.2875\linewidth}{%
\includegraphics[width=.2875\textwidth]
{Bilder/KIT-Innovation}
\begin{itemize}\item Innovation\end{itemize}}
\end{frame}
\begin{frame}
\frametitle{Competence Portfolio}
\parbox{.64\textwidth}{\raggedright
Excellent research is based above all on the skills and knowledgeof
the scientific employees.
\bigskip
In KIT these scientists will work in fields of competence depending
on their expert know-how. Related fields of competence are bundled
in competence areas.
\bigskip
Fields of competence and competence areas make up the competence
portfolioof KIT. It is dynamic and will develop and take up new
scientific topics.}
\hfill
\parbox{.312\textwidth}{%
\includegraphics[width=.312\textwidth]
{Bilder/KIT-Labor1}\\
\includegraphics[width=.133\textwidth]
{Bilder/KIT-Labor2}
\hfill
\includegraphics[width=.176\textwidth]
{Bilder/KIT-Labor3}}
\end{frame}
\begin{frame}
\frametitle{Competence Portfolio}
\framesubtitle{\normalsize\mdseries 30 Fields of Competence Bundled
in 6 Areas of Competence}
\renewcommand{\baselinestretch}{.8}\scriptsize%\selectfont
\begin{tikzpicture}
% Matter and Materials
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,135\Ku) rectangle
(74\Ku,126\Ku)
(37\Ku,130.5\Ku) node {\color{black}Matter and Materials};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,126\Ku) rectangle
(74\Ku,87\Ku);
\pgftext[at=\pgfpoint{2\Ku}{124.6\Ku},top,left]{%
\parbox{72\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Elementary Particle and Astroparticle Physics
\item Condensed Matter
\item Nanoscience
\item Microtechnology
\item Optics and Photonics
\item Applied and New Materials
\end{itemize}}}
% Earth and Environment
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(77\Ku,135\Ku) rectangle
(151\Ku,126\Ku)
(114\Ku,130.5\Ku) node {\color{black}Earth and Environment};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(77\Ku,126\Ku) rectangle
(151\Ku,87\Ku);
\pgftext[at=\pgfpoint{79\Ku}{128.5\Ku},top,left]{%
\parbox{70\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Atmosphere and Climate
\item Geosphere and Risk Management
\item Hydrosphere and Environmental Engineering
\item Constructed Facilities and Urban Infrastructure
\end{itemize}}}
% Applied Life Sciences
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(154\Ku,135\Ku) rectangle
(230\Ku,126\Ku)
(192\Ku,130.5\Ku) node {\color{black}Applied Life Sciences};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(154\Ku,126\Ku) rectangle
(230\Ku,87\Ku);
\pgftext[at=\pgfpoint{156\Ku}{128.5\Ku},top,left]{%
\parbox{74\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Biotechnology
\item Toxicology and Food Science
\item Health and Medical Engineering
\item Cellular and Structural Biology
\end{itemize}}}
% Systems and Processes
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,84\Ku) rectangle
(230\Ku,75\Ku)
(115\Ku,79.5\Ku) node {\color{black}Systems and Processes};
% links:
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,75\Ku) rectangle
(115\Ku,51\Ku);
\pgftext[at=\pgfpoint{2\Ku}{77.5\Ku},top,left]{%
\parbox{111\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Fluid and Particle Dynamics
\item Chemical and Thermal Process Engineering
\item Fuels and Combustion
\end{itemize}}}
% rechts:
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(115\Ku,75\Ku) rectangle
(230\Ku,51\Ku);
\pgftext[at=\pgfpoint{117\Ku}{77.5\Ku},top,left]{%
\parbox{111\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Systems and Embedded Systems
\item Power Plant Technology
\item Product Life Cycle
\item Mobile Systems and Mobility Engineering
\end{itemize}}}
% Information, Communication, and Organization
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(0\Ku,48\Ku) rectangle
(111\Ku,39\Ku)
(55.5\Ku,43.5\Ku) node {\color{black}Information, Communication, and Organization};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(0\Ku,39\Ku) rectangle
(111\Ku,4\Ku);
\pgftext[at=\pgfpoint{2\Ku}{41.5\Ku},top,left]{%
\parbox{109\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Algorithm, Software, and System Engineering
\item Cognition and Information Engineering
\item Communication Technology
\item High-Performance and Grid Computing
\item Mathematical Models
\item Organization and Service Engineering
\end{itemize}}}
% Technology, Culture, and Society
\draw[KITblack50,fill=KITblack30,line width=.5\Ku]
(119\Ku,48\Ku) rectangle
(230\Ku,39\Ku)
(174.5\Ku,43.5\Ku) node {\color{black}Technology, Culture, and Society};
\draw[KITblack50,fill=KITblack15,line width=.5\Ku]
(119\Ku,39\Ku) rectangle
(230\Ku,4\Ku);
\pgftext[at=\pgfpoint{119\Ku}{41.5\Ku},top,left]{%
\parbox{109\Ku}{%
\begin{itemize}\verysmall\itemsep=0pt\parsep=0pt
\item Cultural Heritage and Dynamics of Change
\item Business Organization and Innovation
\item Interaction of Science and Technology with Society
\end{itemize}}}
\end{tikzpicture}
\renewcommand{\baselinestretch}{1}\selectfont
\end{frame}
\begin{frame}
\frametitle{Innovative Research Structures}
\parbox{.65\textwidth}{%
KIT-Centers:
\begin{itemize}
\item Energy
\item Nano \& Micro Science and Technology
\item Elementary Particle and Astroparticle Physics
\item Climate and Environment
\end{itemize}
\bigskip
KIT-Focuses:
\begin{itemize}
\item COMMputation
\item Mobility Systems
\item Optics and Photonics
\item Humans and Technology
\item Applied and New Materials
\end{itemize}}
\hfill
\parbox{.3\textwidth}{%
\includegraphics[width=.3\textwidth]
{Bilder/KIT-Zentren}\\
\parbox{.135\textwidth}{%
\includegraphics[width=.14\textwidth]
{Bilder/KIT-Schwerpunkt1}}%
\hfill
\parbox{.149\textwidth}{%
\hspace*{-.005\textwidth}%
\includegraphics[width=.154\textwidth]
{Bilder/KIT-Schwerpunkt2}\\
\hspace*{-.005\textwidth}%
\includegraphics[width=.154\textwidth]
{Bilder/KIT-Schwerpunkt3}
\vspace*{.055\textwidth}}}
\end{frame}
\begin{frame}
\frametitle{Figures}
\vspace*{10\Ku}
\begin{tabular}[b]{r}
Employees\phantom{m} \\
\resizebox{68\Ku}{!}{\bfseries\color{KITgreen}8.000}
\end{tabular}
\hspace{15\Ku}
\begin{tabular}[b]{r@{\hspace{-.2em}}l}
& Students \\
\resizebox{100\Ku}{!}{\bfseries\color{KITblack50}19.895}
\end{tabular}\\[-1\Ku]
\hfill
\raisebox{7\Ku}{%
\begin{tabular}{r}
\resizebox{52\Ku}{!}{\bfseries 350\phantom{0}} \\
Professors
\end{tabular}}
\hspace{1\Ku}
\begin{tabular}{l}
\resizebox{72\Ku}{!}{\bfseries\color{KITgreen}650} \\
\hspace*{12.5\Ku}annual budget in Million Euros
\end{tabular}
\bigskip
\includegraphics[height=35\Ku]{Bilder/KIT-Liste1}
\hspace{1\Ku}
\includegraphics[height=35\Ku]{Bilder/KIT-Liste2}
\end{frame}
\begin{frame}
\frametitle{Karlsruher Institute of Technology}
\vspace*{10\Ku}
Thank you for your attention.
\bigskip
\includegraphics[width=\textwidth]{Bilder/KIT-Finale-c}
\end{frame}
\end{document}
Folien/KITbeamerXmpl/KITfolXmpl.tex 0 → 100644
%\documentclass{beamer}
%\documentclass[c]{beamer}
\documentclass[t]{beamer}
%\documentclass[b]{beamer}
\listfiles
\mode<presentation>
{
% \usetheme[english]{KIT}
% \usetheme[usefoot]{KIT}
\usetheme[deutsch]{KIT}
%% \usefonttheme{structurebold}
\setbeamercovered{transparent}
%\setbeamertemplate{enumerate items}[circle]
\setbeamertemplate{enumerate items}[ball]
}
\usepackage{babel}
\date{10.05.2010}
%\DateText
%\KITfoot{\parbox[t]{90mm}{\today:\qquad Dies ist eine sehr lange selbstdefinierte Fu\ss{}zeile -- Dies ist eine sehr lange selbstdefinierte Fu\ss{}zeile -- Dies ist eine sehr lange selbstdefinierte Fu\ss{}zeile}}
\usepackage[latin1]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{array}
\usepackage{lipsum}
\usenavigationsymbols
%\usenavigationsymbols[sfHhdb]
%\usenavigationsymbols[sfhHb]
\title[Beispiel eines ganz besonders langen Titels in der Fuzeile, der zu lang fr die Zeile ist und daher umgebrochen werden muss]{Beispiel einer Titelzeile}
\subtitle{Beispiel fr einen Untertitel}
\author{KIT}
\institute{INSTITUTS- FAKULTTS-, ABTEILUNGSNAME}
\TitleImage[height=\titleimageht]{Bilder/bildwand.jpg}
\newcommand{\itemsiii}{
\item Uter res comprovincialis placitum opus alo Liceo, ploro an at lenocinium.
Iuste Immanitas dux sus conclamo an Diuturnus
\item Fatigo, almus ut erro cupido res famulatus Adstringo
\item Stupendum commemoro Annuo ars quies Polliceor
}
\newcommand{\itemsi}{
\item Ne necne Ne ymo iam Vota, Rutilus dux scelus internuntius.
}
\newcommand{\parxmpl}{
Uter res comprovincialis placitum opus alo Liceo, ploro an at lenocinium.
Iuste Immanitas dux sus conclamo an Diuturnus
Fatigo, almus ut erro cupido res famulatus Adstringo
Stupendum commemoro Annuo ars quies Polliceor
}
\newcommand{\Parxmpl}{
Iuste Immanitas dux sus conclamo an Diuturnus
Fatigo, almus ut erro cupido res famulatus Adstringo
}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Folientitel\\zweizeilig}
\heading{Zwischenberschrift}
\begin{itemize}
\itemsiii
\end{itemize}
\bigskip
\heading{Zwischenberschrift}
\begin{itemize}
\itemsiii
\end{itemize}
\vfill
\mbox{}
\end{frame}
\begin{frame}
\frametitle{Bild und Text 1}
\begin{columns}[T]
\column{57mm}
\begin{itemize}\small
\itemsi
\itemsiii
\end{itemize}
\column{50mm}
\hspace*{-6mm}\hfill\includegraphics[width=54mm]{Bilder/tasten.jpg}
\end{columns}
\end{frame}
\begin{frame}
\frametitle{Bild und Text 2}
\framesubtitle{Ein Bild am Anfang}
\includegraphics[width=\textwidth]{Bilder/bildwand.jpg}
\begin{itemize}\small
\itemsi
\itemsiii
\end{itemize}
\vfill
\mbox{}
\end{frame}
\begin{frame}
\frametitle{Aufzhlung}
\framesubtitle{Mit Zwischenberschriften}
\heading{Zwischenberschrift}
\begin{itemize}
\itemsiii
\end{itemize}
\bigskip
\heading{Zwischenberschrift}
\begin{enumerate}
\itemsiii
\end{enumerate}
\vfill
\mbox{}
\end{frame}
\begin{frame}
\frametitle{Das KIT-Logo}
\KITimage[width=.3\textwidth]{Bilder/tasten}
\hfill
\KITframe{\parbox{4cm}{%
\begin{itemize}
\item Eins
\item Zwei
\item Drei
\end{itemize}}}
\bigskip
\setlength{\vgdist}{.01\textwidth}
\KITvectorgraphics[width=.3\textwidth]{Bilder/Small}
\qquad
\KITframe[bg]{\parbox{4cm}{%
\begin{itemize}
\item Eins
\item Zwei
\item Drei
\end{itemize}}}
\end{frame}
\begin{frame}
\frametitle{Mathematische Formeln}
Mathematische Formeln werden mit dem Paket mathpazo gesetzt.
\[a = \sqrt{b} + c^2 + \sum_{i=1}^\infty a_i\]
\end{frame}
\begin{frame}
\frametitle{Fontgren}
Die folgenden Fontgren sind vorgesehen:
\begin{tabular}{>{\ttfamily}ll}
\textbackslash tiny & \tiny tiny \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash scriptsize & \scriptsize scriptsize \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash footnotesize & \footnotesize footnotesize \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash small & \small small \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash normalsize & \normalsize normalsize \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash large & \large large \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash Large & \Large Large \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash LARGE & \LARGE LARGE \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash huge & \huge huge \quad \(x=\sqrt{2}, y=2^{2^2}\) \\
\textbackslash Huge & \Huge Huge \quad \(x=\sqrt{2}, y=2^{2^2}\)
\end{tabular}
\end{frame}
\setlength{\parskip}{.6\baselineskip}
\begin{frame}
\frametitle{\texttt{\textbackslash tiny}}
\tiny
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash scriptsize}}
\scriptsize
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash footnotesize}}
\footnotesize
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash small}}
\small
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash normalsize}}
\parxmpl
\normalsize\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash large}}
\large
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash Large}}
\Large
\parxmpl
\parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash LARGE}}
\LARGE
\Parxmpl
\Parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash huge}}
\huge
\Parxmpl
\Parxmpl
\end{frame}
\begin{frame}
\frametitle{\texttt{\textbackslash Huge}}
\Huge
\Parxmpl
\Parxmpl
\end{frame}
\end{document}
Folien/KITbeamerXmpl/KITfolXmplLogo.tex 0 → 100644
\documentclass[t]{beamer}
%\documentclass[c]{beamer}
\listfiles
\mode<presentation>
{
% \usetheme[english,titlepage0]{KIT}
\usetheme[titlepage0]{KIT}
% \usetheme[usefoot]{KIT}
% \usetheme[deutsch]{KIT}
%% \usefonttheme{structurebold}
\setbeamercovered{transparent}
%\setbeamertemplate{enumerate items}[circle]
\setbeamertemplate{enumerate items}[ball]
}
\usepackage{babel}
%\date{10.05.2010}
%\DateText
%\newlength{\Ku}
%\setlength{\Ku}{1.43375pt}
\usepackage[latin1]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{array}
\usepackage{multicol}
\usepackage{lipsum}
%\usenavigationsymbols
%\usenavigationsymbols[sfHhdb]
%\usenavigationsymbols[sfhHb]
\title{Example for a Title}
%\subtitle{Example for a Subtitle}
\author{KIT}
\institute[\raisebox{-3.5mm}{\includegraphics[height=\KITlogoht]{Bilder/Zlogo}}]
{INSTITUTS- FAKULTTS-, ABTEILUNGSNAME}
\logo{\includegraphics[width=\KITlogowd]{Bilder/Zlogo}}
\TitleImage[height=\titleimageht]{Bilder/bildwand.jpg}
\newcommand{\itemsiii}{
\item Uter res comprovincialis placitum opus alo Liceo, ploro an at lenocinium.
Iuste Immanitas dux sus conclamo an Diuturnus
\item Fatigo, almus ut erro cupido res famulatus Adstringo
\item Stupendum commemoro Annuo ars quies Polliceor
}
\newcommand{\itemsi}{
\item Ne necne Ne ymo iam Vota, Rutilus dux scelus internuntius.
}
\newcommand{\parxmpl}{
Uter res comprovincialis placitum opus alo Liceo, ploro an at lenocinium.
Iuste Immanitas dux sus conclamo an Diuturnus
Fatigo, almus ut erro cupido res famulatus Adstringo
Stupendum commemoro Annuo ars quies Polliceor
}
\newcommand{\Parxmpl}{
Iuste Immanitas dux sus conclamo an Diuturnus
Fatigo, almus ut erro cupido res famulatus Adstringo
}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Image and Text 1}
\begin{columns}[T]
\column{57mm}
\begin{itemize}\small
\itemsi
\itemsiii
\end{itemize}
\column{50mm}
\hspace*{-6mm}\hfill\includegraphics[width=54mm]{Bilder/tasten.jpg}
\end{columns}
\end{frame}
\begin{frame}
\frametitle{Image and Text 2}
\framesubtitle{Starting with a Picture}
\includegraphics[width=\textwidth]{Bilder/bildwand.jpg}
\begin{itemize}\small
\itemsi
\itemsiii
\end{itemize}
\vfill
\mbox{}
\end{frame}
\end{document}
Folien/KITbeamerXmpl/blindtext.sty 0 → 100644
%%
%% This is file `blindtext.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% blindtext.dtx (with options: `package')
%% blindtext_texts.dtx (with options: `package')
%% blindtext.dtx (with options: `packageend')
%% ----------------------------------------------------------------------
%% The original file is loadable from CTAN on:
%% tex-archive/latex/contrib/blindtext
%%
%% Name of contribution: blindtext
%% Name and email: Knut Lickert <knut@lickert.net>
%% Location on CTAN: tex-archive/macros/latex/contrib/blindtext
%% Summary description: Package for writing text
%% License type: Free
%%
%% Announcement text:
%% blindtext.sty:
%% Style to create text.
%% Can be used to create examples with a lot text to become a feeling
%% for the look of classes, packages...
%%
%% There are macros to create dummy text, dummy lists and
%% dummy documents with sections, text and lists.
%%
%% For more information visit
%% http://tex.lickert.net/packages/blindtext/index.html
%% ----------------------------------------------------------------------
\def\blindfileversion{V1.9b}
\def\blindfiledate{2009/06/14}
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%% Digits \0\1\2\3\4\5\6\7\8\9
%% Exclamation \! Double quote \" Hash (number) \#
%% Dollar \$ Percent \% Ampersand \&
%% Acute accent \' Left paren \( Right paren \)
%% Asterisk \* Plus \+ Comma \,
%% Minus \- Point \. Solidus \/
%% Colon \: Semicolon \; Less than \<
%% Equals \= Greater than \> Question mark \?
%% Commercial at \@ Left bracket \[ Backslash \\
%% Right bracket \] Circumflex \^ Underscore \_
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{blindtext}[\blindfiledate\space\blindfileversion\space%
blindtext-Package]
\RequirePackage{xspace}
\providecommand{\frqq}{}
\providecommand{\flqq}{}
\newcommand{\blind@checklanguage}{%
\@ifundefined{blindtext@\languagename}{%
\PackageWarning{blindtext}{\languagename\space not
defined, using English instead.\MessageBreak
}%
\selectlanguage{english}%
}{}%
}
\newcounter{blindtext}\setcounter{blindtext}{1}
\newcounter{Blindtext}\setcounter{Blindtext}{5}
\newcount\blind@countxx
\newcommand{\blindtext}[1][\value{blindtext}]{%
\blind@checklanguage
\blind@countxx=1 %
\loop
\blindtext@text\
\ifnum\blind@countxx<#1\advance\blind@countxx by 1 %
\repeat
}
\newcount\blindtext@numBlindtext
\newcommand{\Blindtext}[1][\value{Blindtext}]{%
\blind@checklanguage
\blindtext@numBlindtext=#1\relax
\blind@Blindtext
}
\newcount\blind@countyy
\newcommand{\blind@Blindtext}[1][\value{blindtext}]{%
\blind@countyy=1 %
\loop
{\blindtext@parstart\blindtext[{#1}]\blindtext@parend\par}%
\ifnum\blind@countyy<\blindtext@numBlindtext\advance\blind@countyy by 1 %
\repeat
}
\newcommand{\blindtext@parstart}{} % Text at start of paragraph
\newcommand{\blindtext@parend}{} % Text at end of paragraph
\newcommand{\parstart}[1]{\renewcommand{\blindtext@parstart}{#1}}
\newcommand{\parend}[1]{\renewcommand{\blindtext@parend}{#1}}
\newif\ifblind@long\blind@longfalse
\newif\ifblind@optional\blind@optionalfalse
\newcounter{blindlist}
\newcounter{blindlistlevel}% Up tu X level
\newcounter{blindlist@level}% internal counter
\newcount\blind@listitem
%% ^^A-----------------------------------------------------------
\newcommand{\blindlist}[1]{%
\blind@checklanguage
\def\blind@listtype{#1}%
\setcounter{blind@levelcount}{1}%
\blind@list
}
\newcommand{\blind@list}[1][5]{%
\setcounter{blindlist}{#1}%
\stepcounter{blindlist@level}% depth of list
\blind@listitem=1 %
\begin{\blind@listtype}%
\blind@items
\end{\blind@listtype}%
\blind@longfalse
\blind@optionalfalse
}
\newcommand{\blindlistlist}[2][4]{%
\setcounter{blindlistlevel}{#1}%
\setcounter{blindlist@level}{0}% deepest reached level
\setcounter{blind@levelcount}{1}% actual level for printout
\def\blind@listtype{#2}%
\blind@list
}
\newcommand{\blindlistlistoptional}{%
\blind@optionaltrue
\blindlistlist
}
\newcommand{\blinditemize}{\blindlist{itemize}}
\newcommand{\blindenumerate}{\blindlist{enumerate}}
\newcommand{\Blindlist}[1]{%
\blind@longtrue
\blindlist{#1}%
}
\newcommand{\Blinditemize}{\Blindlist{itemize}}
\newcommand{\Blindenumerate}{\Blindlist{enumerate}}
\newcommand{\blindlistoptional}[1]{%
\blind@optionaltrue
\blindlist{#1}%
}
\newcommand{\Blindlistoptional}[1]{%
\blind@optionaltrue
\blind@longtrue
\blindlist{#1}%
}
\newcommand{\blinddescription}{\blindlistoptional{description}}
\newcommand{\Blinddescription}{\Blindlistoptional{description}}
\newcounter{blind@listcount}
\newcounter{blind@levelcount}
\newcommand{\blind@items}{%
\setcounter{blind@listcount}{1}%
\loop
\ifblind@optional
\ifblind@long
\item[\blindtext@countitem] \blindtext@text
\else
\item[\blindtext@count] \blindtext@item
\fi
\else % \blind@optionalfalse
\ifblind@long
\item \blindtext@text
\else
\item \blindtext@countitem
\fi
\fi % \ifblind@optional
{%
\loop
\ifnum\value{blindlistlevel}>\value{blindlist@level}%
\stepcounter{blind@levelcount}%
\blind@list[\value{blindlist}]\relax
\addtocounter{blind@levelcount}{-1}%
\setcounter{blind@listcount}{1}%
\repeat
}%
\ifnum\value{blind@listcount}<\value{blindlist}%
\stepcounter{blind@listcount}%
\repeat
}
%% ^^A-----------------------------------------------------------
%Finish a sentence with a dot.
%This macro is redefined for blind text with inline math/formulas.
\def\blindtext@endsentence{.\xspace}%
\newcount{\blind@mathformula}\blind@mathformula=0%
\newif\ifblindmath
\let\oldblindmathtrue\blindmathtrue
\renewcommand{\blindmathtrue}{
\oldblindmathtrue
\def\blindtext@endsentence{%
\advance\blind@mathformula by 1%
\ifcase\blind@mathformula%
\or. \(\sin^2(\alpha) + \cos^2(\beta) = 1\)%
\or\xspace\(E = mc^2\)%
\or. \(\sqrt[n]{a} \cdot \sqrt[n]{b} = \sqrt[n]{ab}\)%
\or. \(\frac{\sqrt[n]{a}}{\sqrt[n]{b}} = \sqrt[n]{\frac{a}{b}}\)%
\or. \(a\sqrt[n]{b} = \sqrt[n]{a^n b}\)%
\or. \(\mathrm{d}\Omega = \sin \vartheta \mathrm{d} \vartheta \mathrm{d}\varphi\)%
\else\global\blind@mathformula=0%
\fi%
.\xspace}%
}%\blindmathtrue
\let\oldblindmathfalse\blindmathfalse
\renewcommand{\blindmathfalse}{
\oldblindmathfalse
\def\blindtext@endsentence{.\xspace}%
}%\includemath
\newcount{\blind@Mathformula}
\blind@Mathformula=0%
\def\blindtext@formula{%
\advance\blind@Mathformula by 1%
\ifcase\blind@Mathformula%
\[\bar x = \frac{1}{n}\sum_{i=1}^{i=n} x_i = \frac{x_1 + x_2 + \dots{} + x_n}{n}\]
\or \[ \int_0^\infty e^{-\alpha x^2} \mathrm{d}x =
\frac12\sqrt{\int_{-\infty}^\infty e^{-\alpha x^2}}
\mathrm{d}x\int_{-\infty}^\infty e^{-\alpha y^2}\mathrm{d}y =
\frac12\sqrt{\frac{\pi}{\alpha}} \]
\or \[ \sum_{k=0}^\infty a_0q^k = \lim_{n\to\infty}\sum_{k=0}^n a_0q^k =
\lim_{n\to\infty} a_0\frac{1-q^{n+1}}{1-q} = \frac{a_0}{1-q}
\]
\or \[x_{1,2}=\frac{-b \pm \sqrt{b^2-4ac}}{2a} = \frac{-p \pm \sqrt{p^2-4q}}{2}\]
\or \[ \frac{\partial^2 \Phi}{\partial x^2} + \frac{\partial^2 \Phi}{\partial y^2} +
\frac{\partial^2 \Phi}{\partial z^2} =
\frac{1}{c^2}\frac{\partial^2\Phi}{\partial t^2}
\]
\or \[\sqrt[n]{a} \cdot \sqrt[n]{b} = \sqrt[n]{ab}\]
\or \[\frac{\sqrt[n]{a}}{\sqrt[n]{b}} = \sqrt[n]{\frac{a}{b}}\]
\or \[a\sqrt[n]{b} = \sqrt[n]{a^n b}\]
\global\blind@Mathformula=0%
\fi%
}%
%% ^^A-----------------------------------------------------------
\newif\ifblindtoc
\blindtocfalse
\newcommand{\blinddocument}{%
\ifblindtoc\tableofcontents\fi
\@ifundefined{chapter}{}{%
\chapter{\blindtext@heading 0 (chapter)}%
\blindtext
}%
\section{\blindtext@heading 1 (section)}%
\blindtext
\subsection{\blindtext@heading 2 (subsection)}%
\blindtext
\subsubsection{\blindtext@heading 3 (subsubsection)}%
\blindtext
\paragraph{\blindtext@heading 4 (paragraph)}%
\blindtext
\section{\blindtext@list}%
\subsection{\blindtext@listEx (itemize)}%
\blinditemize
\subsubsection{\blindtext@listEx (4*itemize)}%
\blindlistlist{itemize}[2]%
\subsection{\blindtext@listEx (enumerate)}%
\blindenumerate
\subsubsection{\blindtext@listEx (4*enumerate)}%
\blindlistlist{enumerate}[2]%
\subsection{\blindtext@listEx (description)}%
\blinddescription
\subsubsection{\blindtext@listEx (4*description)}%
\blindlistlistoptional{description}[2]%
}
\newcommand{\Blinddocument}{%
\ifblindtoc\tableofcontents\fi
\@ifundefined{chapter}{}{%
\chapter{\blindtext@heading 0 (chapter)}%
\blindtext
}%
\section{\blindtext@heading 1 (section)}%
\Blindtext
\subsection{\blindtext@heading 2 (subsection)}%
\Blindtext
\subsubsection{\blindtext@heading 3 (subsection)}%
\Blindtext
\paragraph{\blindtext@heading 4 (paragraph)}%
\Blindtext
\section{\blindtext@list}%
\subsection{\blindtext@listEx (itemize)}%
\Blinditemize
\subsubsection{\blindtext@listEx (4*itemize)}%
\blind@longtrue
\blindlistlist{itemize}[2]%
\subsection{\blindtext@listEx (enumerate)}%
\Blindenumerate
\subsubsection{\blindtext@listEx (4*enumerate)}%
\blind@longtrue
\blindlistlist{enumerate}[2]%
\subsection{\blindtext@listEx (description)}%
\Blinddescription
\subsubsection{\blindtext@listEx (4*description)}%
\blind@longtrue
\blindlistlistoptional{description}[2]%
%
\ifblindmath
\section{\blindtext@blindmath}%
\blindmathpaper%
\fi%
}
\newcommand{\blindmathpaper}{
\blindtext
\blindtext@formula
\blindtext
\blindtext@formula
\blindtext
\blindtext@formula
\blindtext
\blindtext@formula
\blindtext
\blindtext@formula
\blindtext
}%\blindmathpaper
%% ^^A-----------------------------------------------------------
\newcommand{\blind@addtext}[2]{%
\@ifpackageloaded{babel}{
\expandafter\addto\csname extras#1\endcsname{#2}
}{}%
\@ifpackageloaded{polyglossia}{
\expandafter\gappto\csname captions#1\endcsname {#2}
}{}%
\@ifpackageloaded{ngerman}{
\expandafter\g@addto@macro\csname captions#1\endcsname {#2}
}{}%
\@ifpackageloaded{german}{
\expandafter\g@addto@macro\csname captions#1\endcsname {#2}
}{}%
}%\blind@addtext
\def\blindtext@text{%
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Etiam
lobortis facilisis sem. Nullam nec mi et neque pharetra
sollicitudin. Praesent imperdiet mi nec ante. Donec ullamcorper,
felis non sodales commodo, lectus velit ultrices augue, a
dignissim nibh lectus placerat pede. Vivamus nunc nunc, molestie
ut, ultricies vel, semper in, velit. Ut porttitor. Praesent in
sapien. Lorem ipsum dolor sit amet, consectetuer adipiscing elit.
Duis fringilla tristique neque. Sed interdum libero ut metus.
Pellentesque placerat. Nam rutrum augue a leo. Morbi sed elit sit
amet ante lobortis sollicitudin. Praesent blandit blandit mauris.
Praesent lectus tellus, aliquet aliquam, luctus a, egestas a,
turpis. Mauris lacinia lorem sit amet ipsum. Nunc quis urna dictum
turpis accumsan semper.%
}
\def\blindtext@count{%
\ifcase\blind@listitem\or
First\or Second%...
\else
Last%
\blind@listitem=0 %
\fi
\global\advance\blind@listitem by 1 %
}% \blindtext@count
\def\blindtext@item{itemtext}
\def\blindtext@countitem{\blindtext@count\ \blindtext@item}
\def\blindtext@heading{Heading on level\xspace}
\def\blindtext@list{Lists}
\def\blindtext@listEx{Example for list\xspace}
\def\blindtext@blindmath{Some blind text with math formulas}
\def\blindtext@english{}
\blind@addtext{english}{%
\def\blindtext@text{%
Hello, here is some text without a meaning\blindtext@endsentence
This text should show, how a printed text will look like
at this place\blindtext@endsentence If you read this
text, you will get no information\blindtext@endsentence Really? Is there no
information? Is there a difference between this text and some
nonsense like \frqq Huardest gefburn\flqq\blindtext@endsentence
Kjift -- Never mind! A blind text like this gives you information about the selected
font, how the letters are written and the impression of the look\blindtext@endsentence
This text should contain all letters of the alphabet and it should
be written in of the original language\blindtext@endsentence There is no need for a
special contents, but the length of words should match to the
language\blindtext@endsentence%
}% \blindtext@text
}
\blind@addtext{english}{%
\def\blindtext@count{%
\ifcase\value{blind@listcount}\or
First\or Second\or Third\or Fourth\or Fifth\or
Sixth\or Seventh\or Eighth\or Ninth\or Tenth\or
Eleventh\or Twelfth%
\else
Another%
\fi
}% \blindtext@count
\def\blindtext@item{item in a list}%
}%\addto\extrasenglish
\blind@addtext{english}{%
\def\blindtext@heading{Heading on level\xspace}%
\def\blindtext@list{Lists}%
\def\blindtext@listEx{Example for list\xspace}%
}%\addto\extrasenglish
\blind@addtext{english}{%
\def\blindtext@blindmath{Some blind text with math formulas}%
}%\addto\extrasenglish
\def\blindtext@german{}
\blind@addtext{german}{%
\def\blindtext@text{%
Dies hier ist ein Blindtext zum Testen von Textausgaben\blindtext@endsentence
Wer diesen Text liest, ist selbst schuld\blindtext@endsentence
Der Text gibt lediglich den Grauwert der Schrift
an\blindtext@endsentence Ist das wirklich so? Ist es
gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
Blindtext\flqq\ oder \frqq Huardest gefburn\flqq?\blindtext@endsentence
Kjift -- mitnichten! Ein Blindtext bietet mir wichtige
Informationen\blindtext@endsentence An ihm messe ich die
Lesbarkeit einer Schrift, ihre Anmutung, wie harmonisch die
Figuren zueinander stehen und pr\"u\-fe, wie breit oder
schmal sie l\"auft\blindtext@endsentence Ein Blindtext
sollte m\"og\-lichst viele verschiedene Buchstaben
enthalten und in der Originalsprache gesetzt
sein\blindtext@endsentence Er mu\ss\ keinen Sinn ergeben,
sollte aber lesbar sein\blindtext@endsentence
Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
nicht dem eigentlichen Zweck, da sie eine falsche Anmutung
vermitteln\blindtext@endsentence%
}% \blindtext@text
}
\blind@addtext{german}{%
\def\blindtext@count{%
\ifcase\value{blind@listcount}\or
Erster\or Zweiter\or Dritter\or Vierter\or F{\"u}nfter\or
Sechster\or Siebter\or Achter\or Neunter\or Zehnter\or
Elfter\or Zw{\"o}lfter\or Dreizehnter\or Vierzehnter%
\else
Noch ein%
\fi
}% \blindtext@count
\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}%
}%\addto\extrasgerman
\blind@addtext{german}{%
\def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}%
\def\blindtext@list{Listen}%
\def\blindtext@listEx{Beispiel einer Liste\xspace}%
}%\addto\extrasgerman
\blind@addtext{german}{%
\def\blindtext@blindmath{Blindtext mit mathematischen Formeln}%
}%\addto\extrasgerman
\@ifpackageloaded{german}{\selectlanguage{german}}{}
\def\blindtext@ngerman{}
\blind@addtext{ngerman}{%
\def\blindtext@text{%
Dies hier ist ein Blindtext zum Testen von Textausgaben\blindtext@endsentence
Wer diesen Text liest, ist selbst schuld\blindtext@endsentence
Der Text gibt lediglich den Grauwert der Schrift
an\blindtext@endsentence Ist das wirklich so? Ist es
gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
Blindtext\flqq\ oder \frqq Huardest gefburn\flqq?\blindtext@endsentence
Kjift -- mitnichten! Ein Blindtext bietet mir wichtige
Informationen\blindtext@endsentence An ihm messe ich die
Lesbarkeit einer Schrift, ihre Anmutung, wie harmonisch die
Figuren zueinander stehen und pr\"u\-fe, wie breit oder
schmal sie l\"auft\blindtext@endsentence Ein Blindtext
sollte m\"og\-lichst viele verschiedene Buchstaben
enthalten und in der Originalsprache gesetzt
sein\blindtext@endsentence Er mu\ss\ keinen Sinn ergeben,
sollte aber lesbar sein\blindtext@endsentence
Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
nicht dem eigentlichen Zweck, da sie eine falsche Anmutung
vermitteln\blindtext@endsentence%
}% \blindtext@text
}
\blind@addtext{ngerman}{%
\def\blindtext@count{%
\ifcase\value{blind@listcount}\or
Erster\or Zweiter\or Dritter\or Vierter\or F{\"u}nfter\or
Sechster\or Siebter\or Achter\or Neunter\or Zehnter\or
Elfter\or Zw{\"o}lfter\or Dreizehnter\or Vierzehnter%
\else
Noch ein%
\fi
}% \blindtext@count
\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}%
}%\addto\extrasngerman
\blind@addtext{ngerman}{%
\def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}%
\def\blindtext@list{Listen}%
\def\blindtext@listEx{Beispiel einer Liste\xspace}%
}%\addto\extrasngerman
\blind@addtext{ngerman}{%
\def\blindtext@blindmath{Blindtext mit mathematischen Formeln}%
}%\addto\extrasngerman
\@ifpackageloaded{ngerman}{\selectlanguage{ngerman}}{}
\def\blindtext@latin{}
\blind@addtext{latin}{%
\def\blindtext@text{%
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Etiam
lobortis facilisis sem. Nullam nec mi et neque pharetra
sollicitudin. Praesent imperdiet mi nec ante. Donec ullamcorper,
felis non sodales commodo, lectus velit ultrices augue, a
dignissim nibh lectus placerat pede. Vivamus nunc nunc, molestie
ut, ultricies vel, semper in, velit. Ut porttitor. Praesent in
sapien. Lorem ipsum dolor sit amet, consectetuer adipiscing elit.
Duis fringilla tristique neque. Sed interdum libero ut metus.
Pellentesque placerat. Nam rutrum augue a leo. Morbi sed elit sit
amet ante lobortis sollicitudin. Praesent blandit blandit mauris.
Praesent lectus tellus, aliquet aliquam, luctus a, egestas a,
turpis. Mauris lacinia lorem sit amet ipsum. Nunc quis urna dictum
turpis accumsan semper.%
}% \blindtext@text
}
\blind@addtext{latin}{%
\def\blindtext@count{%
\ifcase\value{blind@listcount}\or
Primus\or Duo\or Tres\or Quattuor\or Quinque\or
Sex\or Septem\or Octo\or Novem\or Decem\\or
Undecim\or Duodecim%
\else
Nova%
\fi
}% \blindtext@count
\def\blindtext@item{, altum~\arabic{blind@levelcount}}%
}%\addto\extraslatin
\blind@addtext{latin}{%
\def\blindtext@heading{Sectio\xspace}%
\def\blindtext@list{Caudex}%
\def\blindtext@listEx{Exemplum caudex\xspace}%
}%\addto\extraslatin
\blind@addtext{latin}{%
\def\blindtext@blindmath{Mathematica}%
}%\addto\extraslatin
\def\blindtext@french{}
\blind@addtext{french}{%
\def\blindtext@text{%
Qu'est que c'est?\blindtext@endsentence
C'est mon premi\`{e}re phrase fran\c{c}ais depuis quince ans\blindtext@endsentence %%
}% \blindtext@text
}
\blind@addtext{french}{%
\def\blindtext@count{%
\ifcase\value{blind@listcount}\or
Premier\or Deuxi\`eme\or Troisi\`eme\or Quatri\`eme\or Cinqui\`eme\or
Sixi\`eme\or Septi\`eme\or Huiti\`eme\or Neuvi\`eme\or Dixi\`eme\or
Onzi\`eme\or Douzi\`eme%
\else
L'autres%
\fi
}% \blindtext@count
\def\blindtext@item{point dans une list}%
}%\addto\extrasfrench
\blind@addtext{french}{%
\def\blindtext@heading{Titres de niveau\xspace}%
\def\blindtext@list{Lists}%
\def\blindtext@listEx{Example pour une list\xspace}%
}%\addto\extrasfrench
\blind@addtext{french}{%
\def\blindtext@blindmath{Quelque text avec des formulas math\ematique.}%
}%\addto\extrasfrench
\DeclareOption{math}{
\blindmathtrue
}
\DeclareOption{toc}{
\blindtoctrue
}
\ProcessOptions\relax
\endinput
%%
%% End of file `blindtext.sty'.
Folien/KITbeamerXmpl/lipsum.sty 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
Paper/Spherical Gaussian approximation for Blinn-Phong, Phong and Fresnel - Sébastien Lagarde.url 0 → 100644
[InternetShortcut]
[InternetShortcut]
URL=https://seblagarde.wordpress.com/2012/06/03/spherical-gaussien-approximation-for-blinn-phong-phong-and-fresnel/
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment